...
For T1 SS7 links with line coding configured for B7ZS, only the 48 Kbps data rates (configured in the IMG 1010 - SS7 Link pane) are valid.
Loopback Mode
...
No Loopback
Local Loopback
Remote Loopback
Note: When you place a span in loopback mode the Span Status will indicate Out Of Service. Following the test you must manually put the span back in service by selecting the In Service button.
See IMG 1010 - DS3 Diagnostics for more information.
E1 Profile Pane
...
Once an E1 or T1 profile has been created then the profile will need to be associated with a particular span or group of spans. Configure a T1 or E1 span. See IMG 1010 - Configuring T1 or E1 Bearer Spans - 10.5.x or IMG 1010 - Configuring T1 or E1 Signaling Spans - 10.5.x
Once the spans have been created then the profiles created can be configured for a specific span or group of spans. See screen capture below
Next Topic
IMG 1010 - Configuring T1 or E1 Bearer Spans - 10.5.x
IMG 1010 - Configuring T1 or E1 Signaling Spans - 10.5.x
If configuring DS3 see
IMG 1010 - DS3 Physical Span Configuration - 10.5.x