...
The Probe Endpoint object along with the Logical Interface object and IP Address object are all used to configure the Smart-Probing feature. The Smart-Probing feature enhances the fault tolerance of the IMG by sending a Gratuitous ARP to each of the network endpoints that were configured as Probe Endpoints to the IMG. If the endpoints configured do not respond to the ARP within a specified amount of time, the IMG will automatically switch-over the interface or port to its standby (Ex: Data 0 > Data 1). The Probe Endpoint object configures which IP addresses to send the Gratuitous ARPs to. Refer to the IMG 1010 - Ethernet Redundancy via Smart Probe topic for more information on the Smart-Probing feature. For information on the individual fields in the Probe Endpoint object, refer to the information below.
...
Dialogic IMG EMS > Logical IMG > Physical IMG > IP Network > Logical Interface > Probe Endpoint
...
Related Topics
IMG 1010 - Ethernet Redundancy via Smart Probe
IMG 1010 - IP Network (Interface)
Maximum Objects
Can create up to three Probe Endpoint objects per Logical Interface object.
...