...
This feature adds configurable SCTP Timers Per Association. Refer to the link below for more information.
Related Topics:
FR13536 ISUP Explicit Call Transfer
...
This feature adds configuration for SS7 Explicit Call Transfer (ECT), allowing for effective TDM resource utilization. Refer to the link below for more information.
Related Topics:
FR14356 tel URI for ISDN to SIP Call Interworking
...
This feature adds tel URI for ISDN to SIP Call Interworking. When enabled, a receiving ISDN call would be interworked to SIP with the outgoing SIP INVITE using tel: URI. Refer to the link below for more information.
Related Topics:
FR16756 Dialogic-Calling-Number-NOA VSA
...
This feature adds a new Vendor Specific Attribute (VSA) to the RADIUS Access request message sent to the remote RADIUS server. The new VSA being added is labeled Dialogic-Calling-Number-NOA (VSA #153) and is the Nature of Address of the Calling Party Number that is present in the incoming call. If the Calling Party NOA parameter is changed due to translations, the Called Party Number sent to the RADIUS Server is the initial Called Party Number coming from the incoming call. Refer to the link below for more information.
Related Topics:
FR18297 ISUP/SIP Additional Calling Party Information Interworking
...
This feature adds configuration for Additional Calling Party Information Interworking. When an incoming SIP INVITE message contains the X-DLGC-Add-Call-Info: custom header, and the feature is enabled, SIP module will interwork the Additional Calling Party Information value to be sent out in the outgoing SS7 IAM. The Additional Calling Party Information parameter present in the IAM message will always be interworked to SIP module. According to its configuration, SIP will decide to add the X-DLGC-Add-Call-Info: custom header into the outgoing INVITE. Refer to the link below for more information.
Related Topics:
FR18456 RAM Drive Management Modifications
...