Screen Saver
Overview
You can set up a screen saver on your Sangoma Phone that will turn on after a set amount of time with no activity on the phone.
...
Go into End Point Manager in your PBX and choose the Sangoma brand in the menu.
Click on the name of the template to edit.
Click on the Options menu tab at the top
For the Screen Saver option, click the button for the type of screen saver you want to be displayed. (Dark blue background = selected.)
Time and Logo- Shows the current date & time moving around the screen.
Default Photo- Will show the default included screen saver.
Custom Photo- Allows you to select a custom image to use as a screen saver. When you select the Custom Photo button, the Screen Saver Image drop-down menu appears below, with a list of custom images that have been uploaded. Select an image from this menu. To upload new images, visit the Upload Image section below.
...
For Screen Saver Timeout, pick how long the phone should wait in an idle state before the screen saver is turned on. (Dark blue background = selected.) The options are 1, 2, 5, 10, or 30 Minutes. To disable the screen saver, choose Screen Saver Off.
You now need to update the phone configuration file. The three options at the bottom of the template are:
Save Template- This will only save your changes into the PBX database. It will not write out new config files for the phones that are using this template as mapped in the Extension Mapping section of End Point Manager.
and Rebuild Configs- This will save your changes to the PBX Database and will also write out new config files for the phones that are using this template as mapped in the Extension Mapping section of End Point Manager. The phones will need to be rebooted in order to retrieve the changes.
and Force Update- This will do both the "Save Template" and the "and Rebuild Configs" options above, and it will also immediately update any phones that are mapped to use this template and currently registered to the PBX, with no need to reboot the phones.
...
Navigate to the Image Management section found in the right-hand navigation menu in End Point Manager.
Click on the Add Image button.
Click on the Choose file button.
Pick which file you want to upload.
...
Click on the Upload Image button to save the image.
To view or delete your uploaded images, click on the List Images button.
From here, you can click on the image name to view the image or the trash icon
under Action to delete it.
You can upload as many images as you want, and each template in EPM can use a different image or the same image.
...