HotDesking Explained
The Hot Desking feature works in conjunction with End Point Manager and the Login/Logout Phone App. Below is an outline of how to set it up and best practices for Hot Desking.
...
Verify your Internal or External IP addresses are defined:
Internal- Will use the Internal IP address that is defined here. This is used for phones logging in on the Internal Local Network.
External - Will use the External IP address that is defined here. This is used for phones logging in remotely from the PBX.
Save your changes by clicking the Save Global button.
...
You will be prompted for your extension and password. The password by default is your voicemail password. If you do not have a voicemail box set up on your account, you would use the "User Password" as defined in the End Point Manger Global Settings. You can also optionally use the Admin password as defined in the End Point Manger Global Settings to log into any phone without knowing the voicemail password.
Press the Done button when you're finished.
...
For each brand of phones in End Point Manager, you can define a single Default Template.
To view which template is set up as the default for a brand, click on the brand name in the right nav menu in End Point Manager.
For example we will click on Sangoma.
Any templates created for the brand will show up in a template list. If one of the templates is currently designated as the default, its name will show up under Default Template at the bottom of the page. Otherwise, if no default is defined, you will only see the template list at the top.
In our example, we can see we have 3 Sangoma templates, and at the bottom it shows the template named "standard" is set as the default template.
...
In End Point Manager, under the Extension Mapping section, you normally map an extension to a template, model and MAC Address.
In the example below, if extension 5501 logs in from a Sangoma S500 phone with the MAC address shown below, the template called "my-sangoma-template" would be used.
You can optionally NOT define the MAC Address or Model number, but still map the extension to a specific template for a brand. If you leave the MAC address blank, now when this extension logs in from a phone that matches the brand name, the phone will use the specified template instead of a default template.
In our example, "standard" is not currently our default Sangoma brand template. With the settings shown below, if extension 5501 logs in from any Sangoma brand phone, the phone will use our template called "standard," rather than our current default template.
Logging Out a User From Your Phone
Press the Login/Logout application button on the device.
You'll then see options to "Login" or "Logout."
Highlight Logout and press Select to log the user out of the phone.
