S-Series
Line Key Types
Line keys can be set up in End Point Manager for S-Series with the following options.
...
You now need to update the phone configuration file. Choose an option and click the Apply button. The three options at the bottom of the template are:
Save- This will only save your changes into the PBX database. It will not write out new config files for the phones that are using this template as mapped in the Extension Mapping section of End Point Manager.
Save and Rebuild Config(s)- This will save your changes to the PBX Database and also write out new config files for the phones that are using this template as mapped in the Extension Mapping section of End Point Manager. The phones do not retrieve the updates.
Save, Rebuild Config(s) and Update Phones- This will save changes into the PBX database, write out new config files for the phones, and also immediately update any phones that are mapped to use this template and currently registered to the PBX. This may cause the phones to reboot.
Advanced phones Configuration
You can optionally change the label name for any button type except Line. The Label is the name that will be shown on your phone screen for that button.
When picking the Line type, the label name will be whatever you defined in the Line Label section of the phone Template Settings. The default is to show the extension number of the device. You can change this to show the name instead, or both name and extension number.
You can also drag the button to be in a different spot. Left click on the button and while holding down your left mouse drag the button to a different spot and release it.
In our example we will drag Button 21 up toward the top to make it button 4 on the phone. The button number will not change until you save the model.
Useful links:
S206 Specs: s206 Technical Specs
...