Line Keys Setup
End Point Manager will help you set up the Line keys for your Sangoma Phones, based on the phone family:
Line Key Types
Depending on the phone family type, Line keys can be set up in End Point Manager either for S-Series or P-Series with the following options.
Line Key Types:
BLF- ("Busy Lamp Field") - Monitors another extension or feature code that has state information on your PBX. The state is indicated by the BLF button.
Call Park- Used for one-touch Call Parking.
Conference- Configures a conference button to allow 5-way conference calling.
DTMF- Sends DTMF digits while on a active call, such as having the system dial a feature code while on a active call.
Hold- Places the caller on Hold.
Intercom- Causes the dialed extension to answer using Intercom Calling/Auto Answer instead of ringing.
LDAP- Button to Launch LDAP directory
Line- Sets up a line key. Each phone needs at least one line key.
MultiCast Paging- Starts a page to a specific MultiCast address.
Record- Toggles on-demand call recording. Requires the user to have on-demand recording permissions in the PBX.
Redial- Redials the last number.
SpeedDial- Dials the programmed external number.
To insert pauses, use a comma. Each comma adds a 500ms pause when dialing.
If you want to create a speed dial that dials a number and then waits for the user to enter more digits on the keypad you would use a + at the end of your speed dial such as *80+ would dial *80 when you press the speed dial button and then wait for you to enter more digits.
Transfer-Transfers a call to a new recipient.
Voicemail- Dials the voicemail system, allowing the user to check voicemail.
XML API- Provides access to the specified Phone App.
Configuring Line Buttons
P-Series Line Buttons