IMG 1004 - Quick Start Guide
This IMG 1004 Quick Start Guide is an abbreviated guide which describes how power and network cabling are connected prior to configuring. For more in depth information on installation and setup, refer to IMG 1004 - Installation and Setup Guide.
...
Connect up the cables as shown in the figure below. The figure below displays the DATA interface being connected to a public network.
The DATA interface located on the rear of the IMG 1004 and is a 100 Mbit port dedicated to VoIP Bearer traffic (RTP) or SIP/H.323 signaling. Refer to IMG 1004 - Connecting Ethernet and TDM Cables for more information on connecting to this interface.
...
| Info |
|---|
IMPORTANT: Please read and understand the IMG 1004 technical documentation prior to performing any setup or installation procedures. The documentation can be accessed through the following link IMG 1004 - Introduction |
Create symbolic link to load system software
...
Once these services are running and the IMG software build is available the software can be downloaded. Refer to IMG 1010 - Downloading System Software and download the system software from the GCEMS server to the IMG.
...
For more information on installing GCEMS and ClientView, refer to IMG 1010 - Software Installation and Setup
Starting ClientView to start Configuring Switch
...
Double Click on the IMG ClientView icon on the desktop -or- enter the ./ClientView command from the /opt/dialogic/IMG/IMGUserInterface/ClientView directory.
An About Dialogic ClientView box will appear. Click on the Close button at the bottom.
A Client Socket box appears and asks for username and password. Enter username and password and select OK. The default User and password are:
Username admin
Password adminEventView and ClientView screens will appear. GCEMS and ClientView are now running.
Right Click on the Dialogic IMG EMS object in the ClientView tree and select New Logical IMG. Enter a name for this Logical Node Group.
Right click on The Logical IMG and select New Physical IMG.
In the object that appears, enter a name in the name field and enter the IP address given to the <CTRL 0> interface in the IP address (nn.nn.nn.nn) field. The GCEMS will now connect. Once connected, ClientView will appear like the following screen capture.
The IMG 1004 is now ready to be configured using ClientView.