IMG 1010 - Network Interfaces - One Subnet
Scenario 1 - One Subnet
In this scenario all traffic runs over one subnet. Do not configure the CPU Physical Interface for Redundant Control. It is configured automatically during the BootP process. When configuring H.323 or SIP Signaling, select 10.10.25.2 for the IP Address in the H.323 Signaling or SIP Signaling pane.
...
Stream Type and Where Assigned | Sample IP Address | Physical Interface | Logical Interface | Port on Back Plane |
Control and SignalingAssigned at BootP not Pane | 10.10.25.2 | CPU/CPU H.323/SIP | Redundant Control | CTRL 0 or 1 |
IP Bearer DataAssign in Network Interface Pane | 10.10.25.100 | VoIP Module 0 | Redundant Data | DATA 0 or 1 |
IP Bearer DataAssign in Network Interface Pane | 10.10.25.101 | VoIP Module 1 | Redundant Data | DATA 0 or 1 |
ClientView Panes:
...
