IMG 1010 - Fully Qualified Domain Name Support
Overview:
This feature allows the IMG to support SDP connection (c=) line with a Fully Qualified Domain Name (FQDN) instead of an IP address on the outgoing leg. If the outgoing Fully Qualified Domain Name (FQDN) is configured and then enabled in the SIP SGP Profile pane, the SIP Signaling and/or VoIP module IP addresses of the IMG will be replaced with the FQDN in the outgoing request and/or outgoing SIP response messages. Follow the procedure below to configure FQDN on IMG.
...
Create a SIP Profile. Right Click on Dialogic IMG EMS and select New Profiles.
Right Click on the Profiles object just created and select SIP SGP. Change the SIP Profile ID to something other than 0. This will allow other fields in this object to be changed.hostho Select from drop down menu when the Fully Qualified Domain Name servers will be displayed. See screen capture below
Create SIP Signaling:
Right Click on IMG Name: and select New Signaling. See IMG 1010 - Signaling Object link for more information on this object.
Right Click on the Signaling object created and select New SIP. See IMG 1010 - SIP Signaling Object link for more information on this object.
Enter a FQDN in the Fully Qualified Domain Name (FQDN) field. See screen capture below.
When entering the hostname into the "Fully Qualified Domain Name (FQDN)" field, the hostname is all that is required in this field. If FQDN is outside of the domain then the complete Fully Qualified Domain Name must be entered.
...