IMG 1010 - Configure a Channel to Release with Cause
Overview:
This procedure will provide the steps to change the default cause code mapping for a specific cause code. Note that in the channel group the user sets the incoming and outgoing treatment method to “Release w/Cause”, which is also the default. Per the interworking specifications the IMG will interwork the cause code received on one channel to the other channel if no “Cause Code mapping table” has been linked to the channel group. If a cause code table is used then only the cause codes defined in the table will be modified. All other cause codes will map per the interworking specification.
...
Right-click the Cause Code Table just created and select Add Entry. The Cause Code Entry pane appears.
The ID field is automatically populated.
The Route Criteria Type field is automatically populated with Cause Code.
Click in the Criteria Values field, select a Cause Code from drop down menu. (Incoming Cause Code to match).
Click in the Route Action Type field, select Cause Code from drop down menu.
Click in the Outgoing Cause Code field, select a Cause Code if needed. (Outgoing Cause Code to send).
...