| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Overview
This document will guide you through the process of configuring the Session Border Controllers to work with Switchvox. There are two major applications - 1) SIP Trunking solutions, 2) Remote Phone solutions. This document describes the configuration of SIP Trunking.
...
For Trunking solutions, SBC to Switchvox Configuration Guide provides detailed information about the configuration requirements in the SMB SBC, Vega SBC, Netborder SBC and the Software VM SBC. A typical deployment connects SIP Trunking Service Provider across Internet or other networks into the SBC, where the SBC provides Security, Routing, Interoperability and more, then delivers the SIP Trunk call to the Switchvox IP-PBX. Using SIP Protocol the SBC and the Switchvox create a Trunk together.
SIP Trunking
Bringing SIP Trunks from SIP Trunking Service Providers into the SBC and then deliver the SIP Trunk calls to the Switchvox.
Switchvox IP: 192.168.77.112
SBC LAN IP: 192.168.77.124
SBC DMZ IP: 10.10.32.170
SBC Public WAN IP: 104.145.12.182
ITSP FQDN: itsp.sangoma.com
...
The following configuration will focus on the Switchvox to SBC requirements. It is only half of the configuration needed for proper operation, as the SIP Trunking Service Provider will also need to be configured, along with the External WAN interface and external SIP Profiles and related configuration. The document will reference the SIP Trunking Service Provider but not show how to configure the provider. There are other Wiki's that document how to configure SIP Trunking with SIP Trunking Service Providers.
Switchvox IP: 192.168.77.112
SBC LAN IP: 192.168.77.124
SBC DMZ IP: 10.10.32.170
SBC Public IP: 104.145.12.182
ITSP FQDN: itsp.sangoma.com
...