Page Comparison

...

The following commands are executable commands that you type in your Linux command line

Command	What does it do?
wanrouter start	Starts all ports on your Sangoma card. These ports are listed in /etc/wanpipe/wanrouter.rc under WAN_DEVICES Note: for analog cards, there will be only one port listed.
wanrouter stop	Stops all ports on your Sangoma card. These ports are listed in /etc/wanpipe/wanrouter.rc under WAN_DEVICES Note: for analog cards, there will be only one port listed.
wanrouter restart	restarts all ports on your Sangoma card. These ports are listed in /etc/wanpipe/wanrouter.rc under WAN_DEVICES Note: for analog cards, there will be only one port listed.
wanrouter start <wanpipe#>	Starts a single port on your card. Note: if you have a digital card, this will start the entire cards and all ports
wanrouter stop <wanpipe#>	Stops a single port on your card. Note: if you have a digital card, this will start the entire cards and all ports
wanrouter restart <wanpipe#>	Restarts a single port on your card. Note: if you have a digital card, this will start the entire cards and all ports
wanrouter start <wanpipe# if_name>	Starts a single interface on the port of your card
wanrouter stop <wanpipe# if_name>	Stops a single interface on the port of your card
wanrouter restart <wanpipe# if_name>	Restarts a single interface on the port of your card
wanrouter list	lists all active ports on your card. Note: for 1 analog card only 1 port will be present
wanrouter modules	Displays the Sangoma Driver (a.k.a Wanpipe) kernel modules
wanrouter status	Displays all active ports for all Sangoma cards in your system.
wanrouter summary	Summary of configuration files for your card, which are all located in /etc/wanpipe directory
wanrouter hwprobe	Displays all detected Sangoma Cards in your server.
wanrouter conflogs	Displays Sangoma driver configuration file syntax errors
wanrouter messages	Displays Sangoma driver kernel event messages
wanrouter version	Displays Sangoma driver version number. Useful to identify the age of your driver in comparison to the latest release

Kernel Driver Errors

All Card and driver errors/events will be displayed in:

...

After a successful Driver startup,any extra debugging, such as line tracing or CSU/DSU debugging, will be performed using:

/usr/sbin/wanpipemon -g

For automated Line Error debugging run:

/usr/sbin/wanrouter debug <if_name>
where <if_name> is wanpipe interface name.

Driver Power User Operation

...

        sdladrv.o                   : Hardware Layer
        wanrouter.o          : Wanpipe Protocol Interface Layer
        wanpipe_syncpp.o    : Wanpipe PPP/CHDLC Protocol
        wanpipe.o             : Wanpipe multi-protocol layer
                                            (Frame-Relay,PPP,CHDLC,...)
        af_wanpipe.o     : Wanpipe API socket layer

User space programs

2.1 Configuration (/usr/sbin)
wancfg: Wanpipe configuration tool

...

        insmod sdladrv.o
        insmod wanrouter.o
        insmod wanpipe_syncppp.o
        insmod wanpipe.o
        insmod af_wanpipe.o
    or
        modprobe af_wanpipe

Configure and Start Drivers

If using ADSL
/usr/sbin/wanconfig -a /etc/wanpipe/wan_adsl.list card wanpipe1 up
else
/usr/sbin/wanconfig card wanpipe1 up

Start up all network interfaces

ifconfig wan0 <local ip> pointopoint <remote ip> netmask 255.255.255.255

Confirmation

tail -f /var/log/messages

Check the events and driver statistics.

cat /proc/net/wanrouter/status

Check driver state

wanrouter status

Driver External Scripts

...

Versions Compared

Old Version 1

New Version Current

Key

Kernel Driver Errors

Driver Power User Operation

Driver External Scripts