Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

Table of Contents
minLevel1
maxLevel6
outlinefalse
stylenone
typelist
printablefalse

Description

SNMP (Simple Network Management Protocol) was designed as the standard language to be used by all computers on a network. The SNMP protocol is used by network management systems to communicate with network elements to monitor and control different aspects of the equipment.

...

Below are the key points with respect to SNMP version 1:

  • SNMPv1 was the first version of SNMP.

  • Defines limited, easily implemented MIB of scalar variables and two dimensional tables and has limited functionality

  • Although it accomplished its goal of being an open, standard protocol, it was found to be lacking in key areas for certain applications like security etc.

SNMP version 2 (SNMPv2c)

SNMPv2c is a sub-version of SNMPv2. Below are the key points points with respect to the same:

  • Protocol use to exchange management information 

  • Its key advantage over previous versions is the Inform command. Unlike Traps, which are simply received by a manager, Informs are positively acknowledged with a response message. 
    If a manager does not reply to an Inform, the SNMP agent will resend the Inform.

  • SNMPv2 with community-based security allows for configuration of an agent for authentication, encryption, data access, and trap management. 

  • Improved error handling

  • Improved SET commands

To utilize the SNMPv2c features, one must have an SNMP Manager Application loaded on a PC which supports SNMPv2c. SNMPv2c will monitor DS1, DS3 and Ethernet Interfaces using industry standards MIBs

Info

NOTE

Not all devices are SNMPv2c compliant, so your SNMP manager should be downward compatible with SNMPv1 devices.

SNMP version 3 (SNMPv3)

SNMPv3 is the newest version of SNMP. Its primary feature is enhanced security.

The "EngineID" Identifier in SNMPv3 uniquely identifies each SNMP entity. Conflicts can occur if two SNMP entities have duplicate EngineID's. The EngineID is used to generate the key for authenticated messages.

...