| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Below is procedure used to configure an external/remote H.323 Gateway. Up to 1024 external H.323 or SIP Gateways from which the IMG may receive calls can be created. To configure a group of external/remote H.323 gateways, use the Gateway Mask field to validate a range of IP addresses.
...
Right Click on the IMG Name (Physical IMG) and select New Network. From this object, the interfaces on rear of IMG can be configured. In this procedure, the DATA interface which will interface with the VoIP module will be configured. See IMG 1010 - IP Network (Interface) for more information on the IP Network element. If using an older build then see IMG 1010 - Configuring VoIP
Right Click on IP Network just created and select New IP address. Select VoIP Module from drop down menu in the Physical Interface field and leave the Logical Interface as Data if using the Data Port on rear of IMG. See IMG 1010 - IP Address for more information on populating this object. If using an older build, see IMG 1010 - Configuring VoIP.
Configure IP Bearer Profiles. See IMG 1010 - Configuring IP Bearer Profiles.
Create IP Bearer Facility:
...
Gateway Host Name
Gateway Transport Type
Gateway Registration Required
Registration Expiration Interval
SIP Profile
Options Keep Alive