...
...
...
...
Hardware Installation
  |   |  |   |   |
Unboxing
When opening up your Vega Gateway packaging, carefully inspect the components for any signs of damage due to shipping.
If you notice any damaged components please contact your point of purchase and indicate the issue.
Do not continue to install your Vega Gateway if any of your components are damaged.
What's In the Box
Your Package should contain the following items:
...
1 Vega 4 x 4 VoIP Gateway Appliance
2 LAN Cables (Yellow colour)
1 RJ45-to-usb Console Cable
2 Mounting brackets
AC power Cord (Country specific)
Quick Start Guide
Warranty and License Information
NOTE: Module(s) Sold Separately
Accessories
FXO Plug-In Module (for Vega 3050G)
1 FXO Plug-In Module (provides 2 FXO ports)
1 replacement cover plate with cut-out
Quick Start Guide
Component Overview
Vega 100G
Front Panel of Vega 100G
...
Power - DC Power connector.
E1/T1 Port 1-2 - RJ45 port used to connect your E1/T1 Cable
LAN Port 1/LAN Port 2 - RJ45 ports used to connect your LAN cables. These are Gigabit compatible ports.
Console - Used for diagnostics. Console cable plugs into this port
| Info |
|---|
Port 1 is configured for CPE/TE. This port is typically connected to Telco as it is set to receive the clock from the remote side |
...
Front Panel of Vega 50
...
Back Panel of Vega 50
...
Analogue FXS / FXO Variants
...
...
Vega 50 BRI
Front Panel of Vega 50
...
Power - DC Power connector.
Analog/BRI Ports - porst used to connect analog/bri cables
LAN 1/LAN 2 - RJ45 ports used to connect your LAN cables.
Console - Used for diagnostics. Console cable plugs into this port
...
Vega 5000
Front Panel of Vega 5000
...
Power - AC Power socket..
Analog Ports - Am phenol RJ21 style connector with 25 analog ports.
LAN 1/LAN 2 - RJ45 ports used to connect your LAN cables.
Console - Used for diagnostics. Console cable plugs into this port
Analogue FXS / FXO Variants
...
...
Vega 3000G
Front Panel of Vega 3000
...
Front Panel of Vega 4 x 4
...
Back Panel of Vega 4 x 4
Ground
Power - AC Power socket.
PSTN Interfaces: Protocol and density varies based on model Module(s) Inserted
Console - Used for diagnostics. Console cable plugs into this port
LAN Ports- RJ45 port for LAN
Power LED
...
Pin | FXSFXS | FXOFXO | FWIC | GenGen |
1 |
| |||
2 |
|
|
|
|
3 |
|
| Rx |
|
4 | Tip | Tip | Tx | Tx/Rx |
5 | Ring | Ring | Tx | Tx/Rx |
6 |
|
| Rx |
|
7 |
|
|
|
|
8 |
|
|
|
|
Hardware Installation
Placement
The Vega Gateway can be placed either table top or rack mounted
Table Top: Place Vega Gateway on flat level surface, away from moisture. Verify adequate ventilation to prevent unit from overheating.
Rack Mounting:
All Vega Gateways can be rack mounted. The packaging contents should include rack mounting brackets to be used when mounting on a standard 19" rack unit.
Prerequisites:
Rack mounting bolts (not supplied) are required to mount the gateway + bracket assembly to the rack unit
Rack Mounting Guides:
Ground
Once a location has been selected, properly ground the Vega Gateway using the ground lug located to the left of the power socket
Wiring Connection
Vega 50 / Vega 5000 / Vega 100/200/400G:
...
| Info |
|---|
There is no power switch on the Vega60G/Vega 100G/200G/Vega50/Vega3000G/Vega3050G. As soon as you connect power to the unit it will power up. To switch off the Vega simply unplug the power cord.
The power LED on the front panel will illuminate. |
Accessories
FXO- Plug-In Module For Vega 3050G
...