...
These settings enable you to control everything about your Digium phone. To assign a Digium Phone to an extension, see the “Digium Phones” article.
Volume levels for the ringer, speaker, handset, and headset are controlled from the volume bar on the phone itself.
...
A table like the one below displays the codecs your Digium phone supports in priority of use. You can enable/disable a codec. You can also set its packetization period and jitter settings. You can move it up and down in the table.
...
Multicast Addresses
Create Multicast Address
Enter/edit the following:
...
Auto-answer Switchboard initiated calls. This sets your phone to automatically answer Switchboard-initiated calls. If you click on a Switchboard phonebook entry, normally your phone rings and you have to pick it up, then Switchvox dials the number for that entry. If this box is checked, your phone rings and then automatically goes to Intercom mode and answers the Switchboard, and you hear the phone ringing for the call to your phonebook entry.
Phone Password. Enter your phone password and verify it. (See also the “Settings” article.) This is the Authentication Password that your SIP phone uses for registration with Switchvox. This password may be different than the password used to administer the SIP phone from the phone itself. Also, this password does not change when this extension's voicemail password changes.
Phone NAT Traversal. This option controls how Switchvox communicates with the phone if it is behind a router performing Network Address Translation (NAT). The following options are available:
Always. Select if you are unsure if the phone is behind a router performing NAT.
No. Select if Switchvox is behind NAT but the phone is not.
Never. Select to prevent attempts to translate even if the handset requests it with the report tag.
Route. Select to send responses symmetrically, but not to include the rport tag in the Via header.
Rapid Dial List Assignment. This option offers a Rapid Dial List to the phone. The selected item will be used on the phone unless the phone-user makes a change to his or her Rapid Dial Favorites in the phone-user web suite. The Rapid Dial Lists shown in the dropdown menu can be defined using Tools > Rapid Dial Lists.