...
--> sngtc_server_ctrl (start|stop|restart)*
| Info |
|---|
Note by default this script is started on system boot. |
To enable FreeSWITCH to connect to the sngtc_server and then to the transcoder you will need to have the module mod_sangoma_codec loaded. To load the module run the command below.
FreeSWITCH CLI> load mod_sangoma_codec.so *
| Info |
|---|
Note the step above shows you how to auto load this on FreeSWITCH start. |
...
To status the mod_sangoma_codec module use the commands below:
...