| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Software Installation
Digium® hardware requires drivers and libraries that are not integrated with the Linux kernel. These drivers and libraries including application software, and may be obtained from Digium’s downloads server at:http://downloads.digium.com
For an introduction to Asterisk®, Digium’s telephony software, including information on its configuration, setup and features, please refer to:http://www.asterisk.org . For product-specific documentation including product’s manual and other related information please visithttp://www.digium.com
Software Requirements
Linux 2.6.18 or later
Digium recommends CentOS, Debian, RedHat, and Ubuntu distributions of Linux.
...
| Info |
|---|
Note: These commands includes optional libraries which are used by Asterisk and Asterisk-addons |
Installation Steps
It is recommended that you use the most recent version of the Asterisk, DAHDI, and libpri software for the best results. If you have previously installed any of these, Digium recommends that you upgrade to the latest “-current” version of each.
...
# wget http://downloads.asterisk.org/pub/telephony/libpri/libpri-X.X.X.tar.gz
# tar -zxvf libpri-X.X.X.tar.gz
# cd libpri-X.X.X/
# make
# make install
Configuration
Digium suggest that customers refer to the product manual for specific information about how to configure your Digium Card. Product documentation including product’s manual and other related information it can be obtained athttp://www.digium.com