Connecting Sangoma Phones
...
Congratulations on being the newest member to the Sangoma IP Phone Family!
| Info |
|---|
Sangoma IP Phones are designed to work with:
|
| Info |
|---|
Requires being on FreePBX Distro or PBXact 10.13.66 release. If using FreePBX you will need to make sure your PBX is registered with the FreePBX License server to use Phone Apps or End Point Manager for Sangoma Phones for free. |
Where do I start?
There are 4 ways to setup Sangoma phones. Please select from one of the below
1- Setup Phone using phone with Redirection Service (Zero-Touch Auto-provisioning)
2- Setup Phone using PNP +Phone+With+PnP+Service
3- Setup+Phone using +with+DHCP+Option+66
4- Setup Phone by hard setting Provisioning provisioning server into each phone
We recommend you select Option 1 above.
...
Boot Procedure of a NEW Sangoma Phone
Upon initial boot of a NEW an unprovisioned (or one that has been factory reset) Sangoma phone, it will attempt the following procedure in the order listed, until one is successful:
...