Page Comparison

...

Please make sure to follow PJSIP Endpoint configuration wiki when working with PJSIP driver to connect with VEGA. 

...

1. Visual Message waiting indication - This is visual Message waiting indicator for voice mail indication to user.

2. Caller Id - Caller id type. Refer to Vega admin guide for more details of available caller id type.

3. Digital Rx Gain - Gain applied to received audio from analog line to boost the received signal.

4. Digital Tx Gain - Gain applied to transmitted audio towards analog line to boost the transmitted signal.

5. Telephone Interface - 

   1. Associated Extention against each port of FXS gateway. 

   2. We can select existing created extentions or can create new one from the drop down list "Add new extentions" option.
      

...

1. SIP Trunk - Select SIP trunk to associate this FXO gateway from existing trunks or create new one from drop down list).

2. Caller ID - Caller id type. Refer to Vega admin guide for more details of available caller id type

3. Digital Rx Gain - Gain applied to received audio from analog line to boost the received signal.

4. Digital Tx Gain - Gain applied to transmitted audio towards analog line to boost the transmitted signal.

5. Tone Based Disconnect -  Use tone based disconnect method. Refer to Vega admin guide for more details.

Telephone Connections -  This will have FXO configurations for each FXO port.

...

1. SIP Trunk - Select SIP trunk to associate this Digital gateway from existing trunks or create new one from drop down list).

2. Network Topology - E1 or T1. 

3. ISDN Ports - Depends on Digital Vega gateway models , this will show the list of available ports.

   1. Enabled - Enable/Disable this port. 

   2. Protocol - ISDN protocol

   3. NT - Whether this port will be treated as NT(Network Terminal) or CPE (Customer Premises Equipment).

   4. Handle Emergency calls - If port is selected as CPE then will this port allowed to handle emegerency calls.

   5. CrossOver - Select if you are using cross cable to connect to remote end isdn device.

   6. Clock Master - TSelect if you want this port clock to be master.

   7. Framing - Framing protocol for this port.

   8. Line Encoding - Line Encoding protocol for this port.  Caller id type. 

Refer to Vega admin guide for more details of ISDN gateway configuration.

...