This wiki explains how to set up and manage E911 service on a "Master DID" as well as other DIDs in a SIPStation account. For information on configuring emergency outbound routes in FreePBX, please see our "Outbound Routes Module " FreePBX wiki.
| Info |
|---|
E911 is not available with SIPStation Free Trial accounts. |
| Table of Contents |
|---|
...
Log in to SIPStation at http://www.sipstation.com, and choose a location if applicable.
Click My Account.
If there is no address set up for this SIPStation location's Master E911 DID, you will see a warning message toward the right side of the screen. Click the Configure E911 button.
A Master e911 Address window will pop up. Enter the contact person's name and address. The address must be a valid physical street address and cannot be a P.O. box. Specify floor, suite room number, as applicable.
Click the Save Address button. The window will close.
Now, when viewing the My Account section, you should no longer see any warning message. Instead, toward the left side, you should see a Master E911 Summary section showing the name and address on file.
Managing E911 Services via the SIPStation Store
...
You can remove E911 service at any time, for any DID except the master. To edit more than one number at a time, see the mass operations section below.
Log in to the SIPStation Store at http://www.sipstation.com and select a location if applicable.
Click on the DIDs option at the top of the page.
You will now see a list of all the DIDs that you have with this SIPStation location.
Master E911 Number: The DID that is set up as the Master E911 DID will be at the top, and you will see an Update option.
Additional E911 Numbers: A list of DIDs that have their own E911 addresses set up. You will see an Update option.
Other Numbers: Any DIDs with no E911 service. You will see an Add option.
In our example, we have one DID in each category.
To modify or cancel E911 service on any DID, click on the Update or Add option next to the DID. A window will pop up showing text fields and drop-down menus for the E911 DID Address. The available buttons at the bottom of the window will vary depending upon whether E911 service has already been set up for the DID.
Depending upon which buttons you see, your options are:Click Save to add or change an E911 address. If you are adding new E911 service to a DID, you will also be asked to agree to the monthly charges.
Click Set as master e911 to designate the DID as your new Master E911 Number.
Click Delete e911 Address to remove E911 service from the DID. This will also cancel the monthly charge for E911 on that DID.
...
To edit the E911 information for more than one DID at a time, click the E911 button.
Your DIDs will be shown at the left, divided into two categories: those that do not have an E911 address assigned, and those that do. (Your Master E911 DID is not included and cannot be edited here).
In this example we have two DIDs, one with a E911 address assigned and one that does not yet have an E911 address.
Select the DID(s) you would like to edit as a group. The estimated charges for E911 service will be shown below the DIDs.
In our example we are selecting both DIDs.
Enter or update the Contact Person and Address. This information will be applied to all of the DIDs you just selected. Check the box to agree to the additional monthly charges, and click the Add/Update Addresses button. Be sure to include a floor, suite or room number, as applicable.
Managing E911 Addresses via the FreePBX SIPSTATION Module
| Info |
|---|
These instructions assume you have already connected your SIPStation services with FreePBX by entering your key in the SIPSTATION Module. If you need more information on this, please see our SIPStation Module wiki. SIPStation Free Trial accounts are not eligible for E911 services. |
...