...
| Info |
|---|
Note: If you do not want to duplicate the usernames and passwords on the Vega you can simply trust your entire subnet. This will tell the Vega to accept all registrations from the LAN without requesting a password. If the ITSP is up then a password will be requested from each phone. Only in the event of the ITSP failure will a password not be required from the specified LAN. For details on how to configure this go to http://wiki.sangoma.com/vega-configuration-enp-trust-lan. |
...
...
2) To continue scroll down the page until you see the following sections. You can leave the filters empty, but this can be used to whitelist and blacklist certain IPs. Now go to the SIP ITSP Proxies section and enter your IP PBX's IP and port into the fields provided. You can also decrease the test interval as shown here down to a lower value of 10 seconds. Decreasing the test interval will cause options messages to be sent to your IP PBX more often, therefore when if the IP PBX goes down ENP will know about this within 10 seconds. Also ensure proxy test is set to "options".
...