...
SSH to the Vega and run the below command, based on you dial plan lines set it accordingly in our example we set to 500
...
STEP 4:
Check using the GET command to see if the file can read and you can see the dial plan configured on that file , the output will be as shown below
...
Run the below "dir" command to ensure that your dial plan file is on the system
...
| Info |
|---|
NOTE STEP6: is Optional and is only valid in case of Digital VEGA i.e. VEGA 100/200/400G and is not valid in case of 3000G/3050G/60G |
...
Then in the Source Field you can see the file name of your dial plan field as IF:0[4].., TEL:<'testing.txt'> where the file name we set is testing, ideally it will come automatically if not you have to enter the file name as shown
STEP 8:
Final Step is Testing calls, once all the above is successful then you will see the calls works seamlessly, here is one sample call, wherein you can see the SIP dest it shows the file name and the line number on which this number is placed
...