How to Restart NBE Gateway
...
Open the NetBorder Express Gateway Web Manager in your web browser
Go the Status and Controls tab, select the Logging tab
Change the Mode property from PRODUCTION to DEVELOPMENT
Click the Apply button to activate development logging (logs by default to GatewayDebug.log in the /logs folder)
Restarting the gateway will revert the logging mode to the default value set in the configuration, the changes made in this panel is not permanent.
All call logs will be saved in NBE_root: /logs/call-logs/ where calls will be organized by date and time (SEND THIS TO SUPPORT!)
Note: Changing Mode from Development back to Production and then reverting it back to Development mode is quick and easy way to reset the GatewayDebug.log file.
...
There are two types of channel name formats:
One for digital interfaces (A101,102,104 and 108) and one for analog interfaces (A200):
Digital channel name format
...
Click on "Start -> All Programs -> Netborder Express Gateway -> Configuration -> Edit Global Configuraiton File"
In the file that is opened search (ctrl+f) for "netborder.gw.recordCalls.enabled=false"...
Set the value to true and save the file
The location of the recordings is defined by the "netborder.gw.recordCalls.directory" property. The default value is logs/recording/
Restart the NBE Gateway...see "How to restart NBE Gateway"
Dynamically Enable/Disable Call recording
...
|
...
How does IP
...
Addressing working in NBE
There are 3 parameters (located in the gw.properties file in the config folder of the installation directory) that control the IP Addresses assignment of the gateway:
...
Clocking - You can change the clocking in NBE as shown in the picture below.
Signaling - You will need to change to network mode termination as shown in the picture below
Cabling - You will need a cross over cable if you are connecting back to back with NBE or another pbx. For pinouts go tohttphttps://wikisangomakb.sangoma.com/Pinouts#A101/2/4%20Crossatlassian.net/wiki/spaces/TC/pages/50922195/Cable+Pinouts?search_id=1c7c658d-e973-410c-bcbe-e8bed04c9eae . Note this is different pinouts then a ethernet cross over cable.
...
| ||
<?xml version="1.0"?> <client_registration_config> <!-- Registration entry #1 --> <!-- Registration entry #2 --> <!-- Registrar --> <expiration_sec>3600</expiration_sec> </client_registration_config> Code Block | |
Authentication
Below is how the authentication password is set per user defined in registration above. This is all done with the line "netborder.sip.digestCredentials" in config/gw.properties.
...