Versions Compared

Version Old Version 1 New Version Current
Changes made by

Kelli Higdon

Merry Arpaia

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Manual VLAN Setup

  • By default Sangoma IP Phones from the factory are enabled for DHCP Option 132 and also LLDP.  The phone by default will not use any hard set VLANs if Option 132 or LLDP are enabled on the phone so we need to disable these two options first. Follow the steps below to verify Option 132 and LLDP are disabled. 

  • Log into the Web GUI of each phone from your browser with username of admin and password of admin

  • Click on the Network > Advanced Tab

  • Disable LLDP and DHCP Vlan

  • Set your VLAN tags for the Voice and Data as outlined below.

  • Save your changes and reboot the phone.

  • Make sure in End Point Manager (EPM) you set in your templates as shown above to disable LLDP and DHCP Vlan otherwise when the phone gets a configruation file it will revert what you just did.

...