Core module APIs are useful to create , modify , delete extensions and fetch the values of existing configured extensions.

Table of Contents

style	none

Create Extension

Creating an extension into Freepbx/PBXact system.

...

API Name addExtension API.

API Parameters -

Name	Required	Type	Default	Description
extensionId	Mandatory	ID		Unique string to specify the extension number.
name	Mandatory	string		Display name
tech	Optional	String	pjsip	SIP Technology device driver. If not specify then will use PJSIP to create the extension. Accepted values: "sip" or "pjsip".
channelName	Optional	String		Channel name in case if using DAHDI
callerID	Optional	String		The CallerID name for calls from this user will be set to this name. Recommended to use "name" not the number.
outboundCID	Optional	String		This overrides the caller id when dialling out a trunk. This setting will override the common outbound caller id set in the trunk.
emergencyCID	Optional	String		This caller id will always be set when dialing out an outbound route flagged as emergency. The emergency CID overrides all other caller id settings.
email	Mandatory	String		User Email address to use for services such as voicemail, user management and fax etc.
vmEnable	Optional	Boolean	True	Voicemail enable / disable
vmPassword	Optional	String		Voicemail password. If not specify then user can access the voicemails without any password/pin.
umEnable	Optional	Boolean	True	User manager enable/disable. If enabled mandatory to set umPassword
umGroups	Optional	String	1	User manager group. if not specified will use all user(1) created at the time of installation. In case of multiple add comma separated values.
umPassword	Oprional	String		Set passwords for user management. Its mandatory to set password if umEnable is set to true.
maxContacts	Optional	Integer	1	Set max_contacts value for chan_pjsip extension.

Query Parameters

Code Block
status message

API Request

Code Block

1. Api to add Extension
 
GQLAPI:  /admin/api/api/gql
 
parameters:
 
mutation {
    addExtension(
        input: {
            extensionId: 9090090115
            name: "api test"
            tech: "pjsip"
            channelName: "APi Test2"
            outboundCid: "12345678901"
            email: "xyzabc@gmailcom"
            umGroups: "1"
            umEnable: true
            umPassword: "password"
            vmPassword: "asda"
            vmEnable: true
            callerID: "234234324"
            emergencyCid: "1221333331"
            clientMutationId: "test1231"
            maxContacts: "3"
        }
    ) {
        status
        message
    }
}

API Response

Code Block
{ "data": { "addExtension": { "status": true, "message": "Extension has been created Successfully" } } }

Update Extension

Update extension in FreePBX/PBXACT to do any modification of an existing extension parameters.

...

API Name updateExtension API.

API Parameters -

Name	Required	Type	Default	Description
extensionId	Mandatory	ID		Unique string to specify the extension number.
name	Mandatory	string		Display name
tech	Optional	String		SIP Technology device driver. If not specify then will use PJSIP to create the extension. Accepted values: "sip" or "pjsip".
channelName	Optional	String		Channel name in case if using DAHDI
callerID	Optional	String		The Caller ID name for calls from this user will be set to this name. Recommended to use "name" not the number.
outboundCID	Optional	String		This overrides the caller id when dialing out a trunk. This setting will override the common outbound caller id set in the trunk.
emergencyCID	Optional	String		This caller id will always be set when dialing out an outbound route flagged as emergency. The emergency CID overrides all other caller id settings.
email	Optional	String		User Email address to use for services such as voicemail, user management and fax etc.
vmEnable	Optional	Boolean	True	Voicemail enable / disable. If enabled mandatory to set umPassword.
vmPassword	Optional	String		Voicemail password. If not specify then user can access the voicemails without any password/pin.
umEnable	Optional	Boolean	True	User manager enable/disable
umGroups	Optional	String		User manager group. if not specified will use all user(1) created at the time of installation
umPassword	Oprional	String		Set passwords for user management. Its mandatory to set password if umEnable is set to true.
extPassword	Optional	String		Set a secret/password for extension.
maxContacts	Optional	Integer	1	Set max_contacts value for chan_pjsip extension.

Query Parameters

Code Block
status message clientMutationId

API Request

Code Block

GQLAPI: /admin/api/api/gql
 
Parameters:
 
  mutation {
    updateExtension(
        input: {
            extensionId: 9090090111
            name: "api test"
            tech: "pjsip"
            channelName: "APi Test2"
            outboundCid: "12345678901"
            email: "xyzabc@gmailcom"
            umGroups: "1"
            umEnable: true
            umPassword: "password"
            vmPassword: "password"
            vmEnable: true
            callerID: "234234324"
            emergencyCid: "1221333331"
            clientMutationId: "test1231"
            extPassword: "secret"
            maxContacts: "4"
        }
      ) {
            status
            message
            clientMutationId
       }
}

API Response

Code Block
{ "data": { "updateExtension": { "status": true, "message": "Extension has been updated", "clientMutationId": "test1231" } } }

Delete Extension

Delete an Extension from Freepbx/PBXACT

...

API Name deleteExtension API.

API Parameters -

Name	Required	Type	Default	Description
extensionId	Mandatory	ID		Extension number

Query Parameters

Code Block
status message

API Request

Code Block
GQLAPI: /admin/api/api/gql Parameters: mutation { deleteExtension( input: { extensionId: 9090090115 } ) { status message } }

API Response

Code Block
{ "data": { "deleteExtension": { "status": true, "message": "Extension has been deleted" } } }

Create Range of Extensions

...

API Name: createRangeofExtension API

API Parameters -

Name	Required	Type	Default	Description
startExtension	Mandatory	ID		First Extension number to create/configure.
name	Optional	String		The caller id name which we want to append along with the extension number.
channelName	Optional	String		Channel name in case if using DAHDI
tech	Optional	String	PJSIP	SIP Technology device driver. If we want to convert extension from one driver type to other for example chan_sip to pjsip conversion.
numberOfExtensions	Mandatory	ID		Number of extensions to create/configure.
outboundCid	Optional	String		This overrides the caller id when dialling out a trunk. This setting will override the common outbound caller id set in the trunk.
emergencyCid	Optional	String		This caller id will always be set when dialing out an outbound route flagged as emergency. The emergency CID overrides all other caller id settings.
email	Optional	String		User Email address to use for services such as voicemail, user management and fax etc.
vmEnable	Optional	Boolean	True	Voicemail enable / disable
vmPassword	Optional	String		Voicemail password. If not specify then user can access the voicemails without any password/pin.
umEnable	Optional	Boolean	True	User manager enable/disable
umGroups	Optional	String		User manager group. if not specified will use all user(1) created at the time of installation

Query Parameters

Code Block
status message

API Request

Code Block

GQLAPI: /admin/api/api/gql
 
Parameters:
 
mutation {
    createRangeofExtension(
        input: {
            startExtension: 110
            numberOfExtensions: 2
            tech: "pjsip"
            channelName: "pjsip"
            name: "APi Test2"
            outboundCid: "12345678901"
            email: "xyzabc@gmailcom"
            umEnable: true
            umGroups: "1"
            vmEnable: true
            vmPassword: "123451"
            emergencyCid: "1221333331"
            clientMutationId: "test1231"
        }
    ) {
    message
        status
    }
}

API Response

Code Block
{ "data": { "createRangeofExtension": { "message": "Extension's has been created Successfully", "status": "true" } } }

Fetch a particular extension detail

API Name : fetchExtension

API Parameters:

Name	Required	Type	Default	Description
id	Mandatory	ID		Extension Id to query

API Parameters to query

Query Parameters

Code Block

  status
  message
  id
  extensionId
  user {
    name
    outboundCid
    voicemail
    ringtimer
    noanswer
    noanswerDestination
    noanswerCid
    busyCid
    sipname
    password
    extPassword
  }
  coreDevice {
    deviceId
    dial
    devicetype
    description
    emergencyCid
    tech
    callerId
    sipdriver
    user {
      name
      outboundCid
      voicemail
      ringtimer
      sipname
  }
}

API Request

Code Block

GQLAPI: /admin/api/api/gql
 
Parameters:
 
{
  fetchExtension(extensionId: "9090090110") {
    status
    message
    id
    extensionId
    user {
      name
      outboundCid
      voicemail
      ringtimer
      noanswer
      noanswerDestination
      noanswerCid
      busyCid
      sipname
      password
      extPassword
    }
    coreDevice {
      deviceId
      dial
      devicetype
      description
      emergencyCid
      
     }
    }
  }

API Response

Code Block

{
  "data": {
    "fetchExtension": {
      "status": true,
      "message": "Extension found successfully",
      "id": "ZXh0ZW5zaW9uOjkwOTAwOTAxMTA=",
      "extensionId": "9090090110",
      "user": {
        "name": "APi Test2",
        "outboundCid": "12345678901",
        "voicemail": "default",
        "ringtimer": 0,
        "noanswer": "",
        "noanswerDestination": "",
        "noanswerCid": "",
        "busyCid": "",
        "sipname": "",
        "password" : "password",
        "extPassword": "ecc6de2001ceb217a04d5d9ac90f3e1123444c"
      },
      "coreDevice": {
        "deviceId": "9090090110",
        "dial": "PJSIP/9090090110",
        "devicetype": "fixed",
        "description": "APi Test2",
        "emergencyCid": "",
      }
    }
  }
}

Fetch all Extensions Details

...

API Parameters to query

Query Parameters

Code Block
status message totalCount extension { id extensionId user { name

password


     outboundCid
     ringtimer
     noanswer
     sipname
     password
     extPassword
    }
    coreDevice {
        deviceId
        dial
        devicetype
        description
        emergencyCid
        tech
        callerId
        sipdriver
   }
}

API Request

Code Block
GQLAPI: /admin/api/api/gql Parameters: { fetchAllExtensions { status message totalCount extension { id extensionId user { name password outboundCid ringtimer noanswer sipname

password

              extPassword
            }
              coreDevice {
              deviceId
              dial
              devicetype
              description
              emergencyCid
            }
        }
    }
}

API Response

Code Block

{
  "data": {
    "fetchAllExtensions": {
      "status": true,
      "message": "Extension's found successfully",
      "totalCount": 4,
      "extension": [
        {
          "id": "ZXh0ZW5zaW9uOg==",
          "extensionId": "100",
          "user": {
            "name": "100

", "password": "

",
            "outboundCid": "",
            "ringtimer": 0,
            "noanswer": "",
            "sipname": "",
            "password" : "password",
            "extPassword": "ecc6de2001ceb217a04d5d9ac90f3e1123444c"
          },
          "coreDevice": {
            "deviceId": "100",
            "dial": "PJSIP/100",
            "devicetype": "fixed",
            "description": "100",
            "emergencyCid": ""
          }
        },
        {
          "id": "ZXh0ZW5zaW9uOg==",
          "extensionId": "101",
          "user": {
            "name": "101",
            "password": "",
            "outboundCid": "",
            "ringtimer": 0,
            "noanswer": "",
            "sipname": "",
            "password": "password",
            "extPassword": "ecc6de2001ceb217a04d5d9ac90f3e1123444c"
          },
          "coreDevice": {
            "deviceId": "101",
            "dial": "PJSIP/101",
            "devicetype": "fixed",
            "description": "101",
            "emergencyCid": ""
          }
        }]
  }
}

Fetch all valid extensions

...

API Parameters to query

Query Parameters

Code Block

status
message
count
extension {
   id
   extensionId
   user {
     name
     password
     outboundCid
     ringtimer
     noanswer
     sipname
     password
     extPassword
    }
    coreDevice {
        deviceId
        dial
        devicetype
        description
        emergencyCid
        tech
        callerId
        sipdriver
   }
}

API Request

Code Block

GQLAPI: /admin/api/api/gql
 
Parameters:
 
{
    fetchAllValidExtensions {
        status
        message
        count
        extension {
            id
            extensionId
            user {
              name
              password
              outboundCid
              ringtimer
              noanswer
              sipname
              password
              extPassword
            }
              coreDevice {
              deviceId
              dial
              devicetype
              description
              emergencyCid
            }
        }
    }
}

API Response

Code Block

{
  "data": {
    "fetchAllValidExtensions": {
      "status": true,
      "message": "Valid core extensions",
      "count": 2,
      "extension": [
        {
          "id": "ZXh0ZW5zaW9uOg==",
          "extensionId": "100",
          "user": {
            "name": "100",
            "password": "",
            "outboundCid": "",
            "ringtimer": 0,
            "noanswer": "",
            "sipname": "",
            "password" : "password",
            "extPassword": "ecc6de2001ceb217a04d5d9ac90f3e1123444c"
          },
          "coreDevice": {
            "deviceId": "100",
            "dial": "PJSIP/100",
            "devicetype": "fixed",
            "description": "100",
            "emergencyCid": ""
          }
        },
        {
          "id": "ZXh0ZW5zaW9uOg==",
          "extensionId": "101",
          "user": {
            "name": "101",
            "password": "",
            "outboundCid": "",
            "ringtimer": 0,
            "noanswer": "",
            "sipname": "",
            "password": "password",
            "extPassword": "ecc6de2001ceb217a04d5d9ac90f3e1123444c"
          },
          "coreDevice": {
            "deviceId": "101",
            "dial": "PJSIP/101",
            "devicetype": "fixed",
            "description": "101",
            "emergencyCid": ""
          }
        }]
  }
}

Add Inbound Route

Creating inbound route into Freepbx/PBXact system.

...

API Name addInboundRoute API.

API Parameters -

Name	Required	Type	Description
extension	Optional	string	Define the expected DID Number if your trunk passes DID on incoming calls. if did not pass this field then show default value as `Any` in the user interface
cidnum	Optional	string	Define the CallerID Number to be matched on incoming calls, if did not pass this field then show default value as `Any` in the user interface
description	Optional	String	Provide a meaningful description of what this incoming route is
privacyman	Optional	Boolean	If no CallerID has been received, Privacy Manager will ask the caller to enter their phone number. If an user/extension has Call Screening enabled, the incoming caller will be prompted to say their name when the call reaches the user/extension.
alertinfo	Optional	String	ALERT_INFO can be used for distinctive ring with SIP devices.
ringing	Optional	Boolean	Some devices or providers require RINGING to be sent before ANSWER. You'll notice this happening if you can send calls directly to a phone, but if you send it to an IVR, it won't connect the call.
mohclass	Optional	String	Set the MoH class that will be used for calls that come in on this route. For example, choose a type appropriate for routes coming in from a country which may have announcements in their language.
grppre	Optional	String	CID name prefix
delay_answer	Optional	Integer	An optional delay to wait before processing this route. Setting this value will delay the channel from answering the call. This may be handy if external fax equipment or security systems are installed in parallel and you would like them to be able to seize the line.
pricid	Optional	Boolean	This effects CID ONLY routes where no DID is specified. If checked, calls with this CID will be routed to this route, even if there is a route to the DID that was called. Normal behavior is for the DID route to take the calls. If there is a specific DID/CID route for this CID, that route will still take the call when that DID is called
pmmaxretries	Optional	String	Number of attempts the caller has to enter a valid CallerID. Default value is 3
pmminlength	Optional	String	Minimum amount of digits CallerID needs to contain in order to be considered valid. Default value is 10
reversal	Optional	Boolean	On PRI channels the carrier will send a signal if the caller indicates a billing reversal. When checked this route will reject calls that indicate a billing reversal if supported
rvolume	Optional	String	Override the ringer volume. Note: This is only valid for Sangoma phones at this time. Default value is 0
fanswer	Optional	Boolean	Set to Yes to force the call to be answered at this time
destination	Mandatory	String	Destination for route. for example value like this, extension (100) :`from-did-direct,100,1`

Query Parameters

Code Block
inboundRoute { id } status message

API Request

Code Block
1. Api to add inbound route GQLAPI: /admin/api/api/gql parameters: mutation { addInboundRoute(input: { extension:"71667" cidnum:"

1232abc

1232"
          description:"Lorem Ipsum"
          privacyman:false
          alertinfo:"Lorem Ipsum"
          ringing:true
          mohclass:"Lorem Ipsum"
          grppre:"ABC"
          delay_answer:12
          pricid:false
          pmmaxretries:"123"
          pmminlength:"12"
          reversal:true
          rvolume:"12"
          fanswer:true
          destination:"1233"
    }) {
        inboundRoute {
          id
        }
        status
        message
    }
}

API Response

Code Block
{ "data": { "addInboundRoute": { "inboundRoute": { "id": "71667/

1232abc

1232"
      }
      "status": true,
      "message": "Inbound Route created successfully"
    }
  }
}

Update Inbound Route

Updating inbound route into Freepbx/PBXact system.

...

API Name updateInboundRoute API.

API Parameters -

Name	Required	Type	Description
oldExtension	Optional	string	Old Extension. Used to change the current extension
oldCidnum	Optional	string	Old CID Num. Used to change the current cid number
extension	Mandatory	string	Define the expected DID Number if your trunk passes DID on incoming calls.
cidnum	Mandatory	string	Define the CallerID Number to be matched on incoming calls. Can only be numbers, A-D, * and #. DID may also start with a +. Patterns must begin with an _ DID may also start with a +.
description	Optional	String	Provide a meaningful description of what this incoming route is
privacyman	Optional	Boolean	If no CallerID has been received, Privacy Manager will ask the caller to enter their phone number. If an user/extension has Call Screening enabled, the incoming caller will be prompted to say their name when the call reaches the user/extension.
alertinfo	Optional	String	ALERT_INFO can be used for distinctive ring with SIP devices.
ringing	Optional	Boolean	Some devices or providers require RINGING to be sent before ANSWER. You'll notice this happening if you can send calls directly to a phone, but if you send it to an IVR, it won't connect the call.
mohclass	Optional	String	Set the MoH class that will be used for calls that come in on this route. For example, choose a type appropriate for routes coming in from a country which may have announcements in their language.
grppre	Optional	String	CID name prefix
delay_answer	Optional	Integer	An optional delay to wait before processing this route. Setting this value will delay the channel from answering the call. This may be handy if external fax equipment or security systems are installed in parallel and you would like them to be able to seize the line.
pricid	Optional	Boolean	This effects CID ONLY routes where no DID is specified. If checked, calls with this CID will be routed to this route, even if there is a route to the DID that was called. Normal behavior is for the DID route to take the calls. If there is a specific DID/CID route for this CID, that route will still take the call when that DID is called
pmmaxretries	Optional	String	Number of attempts the caller has to enter a valid CallerID. Default value is 3
pmminlength	Optional	String	Minimum amount of digits CallerID needs to contain in order to be considered valid. Default value is 10
reversal	Optional	Boolean	On PRI channels the carrier will send a signal if the caller indicates a billing reversal. When checked this route will reject calls that indicate a billing reversal if supported
rvolume	Optional	String	Override the ringer volume. Note: This is only valid for Sangoma phones at this time. Default value is 0
fanswer	Optional	Boolean	Set to Yes to force the call to be answered at this time
destination	Mandatory	String	Destination for route

Query Parameters

Code Block
inboundRoute { id } status message

API Request

Code Block

1. Api to update inbound route
 
GQLAPI:  /admin/api/api/gql
 
parameters:
mutation {
    updateInboundRoute(input: {
          oldExtension:"71667"
          oldCidnum:"1232lorem"
          extension:"9999"
          cidnum:"9999Lorem"
          description:"Lorem Ipsum"
          privacyman:false
          alertinfo:"Lorem Ipsum"
          ringing:true
          mohclass:"Lorem Ipsum"
          grppre:"ABC"
          delay_answer:12
          pricid:false
          pmmaxretries:"123"
          pmminlength:"12"
          reversal:true
          rvolume:"12"
          fanswer:true
          destination:"1233"
    }) {
        inboundRoute {
          id
        }
        status
        message
    }
}

API Response

Code Block
{ "data": { "updateInboundRoute": { "inboundRoute": { "id": "71667/1232lorem" } "status": true, "message": "Inbound Route updated successfully" } } }

Remove Inbound Route

Remove inbound route from Freepbx/PBXact system.

...

API Name removeInboundRoute API.

API Parameters -

Name	Required	Type	Default	Description
id	Mandatory	string		Inbound Route Id

Query Parameters

Code Block
status message deletedId

API Request

Code Block
1. Api to remove inbound route GQLAPI: /admin/api/api/gql parameters: mutation { removeInboundRoute(input: { id:"71667/1232lorem" }) { status message deletedId } }

API Response

Code Block
{ "data": { "removeInboundRoute": { "status": true, "message": "Inbound Route deleted successfully", "deletedId": "71667/1232lorem" } } }

Fetch All Inbound Routes

API Name : allInboundRoutes

...

API Parameters to query

Query Parameters

Code Block
inboundRoutes { id extension cidnum description privacyman alertinfo ringing mohclass grppre delay_answer pricid pmmaxretries pmminlength reversal rvolume fanswer destinationConnection }

API Request

Code Block

GQLAPI: /admin/api/api/gql
 
Parameters:
 
{
  allInboundRoutes{
    inboundRoutes {
            id
            extension
            cidnum
            description
            privacyman
            alertinfo
            ringing
            mohclass
            grppre
            delay_answer
            pricid
            pmmaxretries
            pmminlength
            reversal
            rvolume
            fanswer
            destinationConnection
         }
    }
}

API Response

Code Block

{
  "data": {
    "allInboundRoutes": {
      "inboundRoutes": [
        {
          "id": "71667/1232dsds",
          "extension": "71667",
          "cidnum": "1232dsds",
          "description": "Lorem Ipsum",
          "privacyman": false,
          "alertinfo": "Lorem Ipsum",
          "ringing": true,
          "mohclass": "Lorem Ipsum",
          "grppre": "ABC",
          "delay_answer": 12,
          "pricid": false,
          "pmmaxretries": 12,
          "pmminlength": 12,
          "reversal": false,
          "rvolume": 12,
          "fanswer": false,
          "destinationConnection": "Extensions: 4001 Extension 4001"
        }
      ]
    }
  }
}

Fetch Inbound Route

API Name : inboundRoute

...

API Parameters to query

Query Parameters

Code Block
id extension cidnum description privacyman alertinfo ringing mohclass grppre delay_answer pricid pmmaxretries pmminlength reversal rvolume fanswer destinationConnection

API Request

Code Block

GQLAPI: /admin/api/api/gql
 
Parameters:
 
 
query {
    inboundRoute( id: "71667/1232dsds") {
          id
          extension
          cidnum
          description
          privacyman
          alertinfo
          ringing
          mohclass
          grppre
          delay_answer
          pricid
          pmmaxretries
          pmminlength
          reversal
          rvolume
          fanswer
          destinationConnection
    }
}

API Response

Code Block

{
  "data": {
    "inboundRoute": {
      "id": "71667/1232dsds",
      "extension": "71667",
      "cidnum": "1232dsds",
      "description": "Lorem Ipsum",
      "privacyman": false,
      "alertinfo": "Lorem Ipsum",
      "ringing": true,
      "mohclass": "Lorem Ipsum",
      "grppre": "ABC",
      "delay_answer": 12,
      "pricid": false,
      "pmmaxretries": 12,
      "pmminlength": 12,
      "reversal": false,
      "rvolume": 12,
      "fanswer": false,
      "destinationConnection": "Extensions: 4001 Extension 4001"
    }
  }
}

Create Core Device

Creating an core device into Freepbx/PBXact system.

...

API Name addCoreDevice API.

API Parameters -

Name	Required	Type	Default	Description
id	Mandatory	ID		Give your device a unique integer ID. The device will use this ID to authenticate to the system.
tech	Mandatory	String	pjsip	Technology driver type
dial	Mandatory	String		How to dial this device, this should not be changed unless you know what you are doing.
devicetype	Mandatory	String		Devices can be fixed or adhoc. Fixed devices are always associated to the same extension/user. Adhoc devices can be logged into and logged out of by users.
description	Optional	String		The CallerID name for this device will be set to this description until it is logged into.
user	Optional	String		Fixed devices will always mapped to this user. Adhoc devices will be mapped to this user by default.
emergency_cid	Optional	String		This CallerID will always be set when dialing out an Outbound Route flagged as Emergency. The Emergency CID overrides all other CallerID settings.

Query Parameters

Code Block
status message

API Request

Code Block

1. Api to add Core Device
 
GQLAPI:  /admin/api/api/gql
 
parameters:
 
mutation {
    addCoreDevice(input: {
        id:111223345
        tech:"pjsip"
        description:"Lorem Ipsum"
        dial:"222333"
        devicetype:"Lorem"
        user:"222333"
        emergency_cid:"222333"
    }){
        message
        status
    }
}

API Response

Code Block
{ "data": { "addCoreDevice": { "message": "Core device has been created successfully", "status": true } } }

Update Core Device

Updating an core device into Freepbx/PBXact system.

...

API Name updateCoreDevice API.

API Parameters -

Name	Required	Type	Default	Description
id	Mandatory	ID		Give your device a unique integer ID. The device will use this ID to authenticate to the system.
tech	Mandatory	String	pjsip	Technology driver type
dial	Mandatory	String		How to dial this device, this should not be changed unless you know what you are doing.
devicetype	Mandatory	String		Devices can be fixed or adhoc. Fixed devices are always associated to the same extension/user. Adhoc devices can be logged into and logged out of by users.
description	Optional	String		The CallerID name for this device will be set to this description until it is logged into.
user	Optional	String		Fixed devices will always mapped to this user. Adhoc devices will be mapped to this user by default.
emergency_cid	Optional	String		This CallerID will always be set when dialing out an Outbound Route flagged as Emergency. The Emergency CID overrides all other CallerID settings.

Query Parameters

Code Block
status message

API Request

Code Block

1. Api to update Core Device
 
GQLAPI:  /admin/api/api/gql
 
parameters:
 
mutation {
    updateCoreDevice(input: {
        id:111223345
        tech:"pjsip"
        description:"Lorem Ipsum Updated"
        dial:"222333"
        devicetype:"Lorem"
        user:"222333"
        emergency_cid:"222333"
    }){
        message
        status
    }
}

API Response

Code Block
{ "data": { "updateCoreDevice": { "message": "Core device has been updated successfully", "status": true } } }

Fetch a particular core device details

API Name : fetchCoreDevice

API Parameters:

Name	Required	Type	Default	Description
device_id	Mandatory	ID		Device Id to query

API Parameters to query

Query Parameters

Code Block
deviceId tech dial devicetype user { id } description emergencyCid

API Request

Code Block
GQLAPI: /admin/api/api/gql Parameters: { fetchCoreDevice(device_id: "111223345") { deviceId tech dial devicetype user { id } description emergencyCid } }

API Response

Code Block

{
  "data": {
    "fetchCoreDevice": {
      "deviceId": "111223345",
      "tech": "pjsip",
      "dial": "PJSIP/111223345",
      "devicetype": "fixed",
      "user": {
        "id": "Y29yZXVzZXI6"
      },
      "description": "Lorem Ipsum updated",
      "emergencyCid": ""
    }
  }
}

Fetch all Core Device Details

...

API Parameters to query

Query Parameters

Code Block
coreDevice{ deviceId tech callerId sipdriver dial devicetype user { id } description emergencyCid } totalCount status message

API Request

Code Block
GQLAPI: /admin/api/api/gql Parameters: { fetchAllCoreDevices { coreDevice{ deviceId tech dial devicetype user { id } description emergencyCid } totalCount status message } }

API Response

Code Block

{
    "data": {
        "fetchAllCoreDevices": {
            "coreDevice": [
                {
                    "deviceId": "10007",
                    "tech": "pjsip",
                    "dial": "PJSIP/10007",
                    "devicetype": "fixed",
                    "user": {
                        "id": "Y29yZXVzZXI6MTAwMDc="
                    },
                    "description": "Test",
                    "emergencyCid": ""
                },
                {
                    "deviceId": "1002",
                    "tech": "pjsip",
                    "dial": "PJSIP/1002",
                    "devicetype": "fixed",
                    "user": {
                        "id": "Y29yZXVzZXI6"
                    },
                    "description": "Testing-ABC",
                    "emergencyCid": ""
                }
            ],
            "totalCount": 134,
            "status": true,
            "message": "Core Device's found successfully"
        }
    }
}

Delete Core Device

Delete an Core Device from Freepbx/PBXACT

...

API Name deleteCoreDevice API.

API Parameters -

Name	Required	Type	Default	Description
id	Mandatory	ID		Device number

Query Parameters

Code Block
deletedId status message

API Request

Code Block
GQLAPI: /admin/api/api/gql Parameters: mutation { deleteCoreDevice(input: { id:"1114334" }){ deletedId message status } }

API Response

Code Block
{ "data": { "deleteCoreDevice": { "deletedId": "1114334", "message": "Core device has been deleted successfully", "status": true } } }

Update Advance Setting's

API Name updateAdvanceSettings API.

API Parameters -

Name	Required	Type	Default	Description
keyword	Mandatory	Enum		Keyword of the settings which needs to updated
value	Mandatory	string		Value of the settings

Query Parameters

Code Block
status message

API Request

Code Block
GQLAPI: /admin/api/api/gql Parameters: mutation { updateAdvanceSettings(input: { keyword:AS_DISPLAY_FRIENDLY_NAME value:"0" }){ message status } }

API Response

Code Block
{ "data": { "updateAdvanceSettings": { "message": "Setting's updated successfully", "status": true } } }

Fetch a particular advance settings details

API Name : fetchAdvanceSetting

API Parameters:

Name	Required	Type	Default	Description
keyword	Mandatory	String		Keyword of the settings which needs to be fetched

API Parameters to query

Query Parameters

Code Block
keyword value name category description status message

API Request

Code Block
GQLAPI: /admin/api/api/gql Parameters: query{ fetchAdvanceSetting(keyword:"HTTPENABLED") { keyword value name category description status message } }

API Response

Code Block

{
  "data": {
    "fetchAdvanceSetting": {
      "keyword": "HTTPENABLED",
      "value": "0",
      "name": "Enable the mini-HTTP Server",
      "category": "Asterisk Builtin mini-HTTP server",
      "description": "Whether the Asterisk HTTP interface is enabled or not. This is for Asterisk, it is not directly related for FreePBX usage and the value of this setting is irrelevant for accessing core FreePBX settings. Default is no.",
      "status": true,
      "message": "Setting's found successfully"
    }
  }
}

Fetch all Advance Settings Details

...

API Parameters to query

Query Parameters

Code Block
settings{ keyword value name category description } status message

API Request

Code Block
GQLAPI: /admin/api/api/gql Parameters: query{ fetchAllSettings { settings{ keyword value name category description } status message } }

API Response

Code Block

{
  "data": {
    "fetchAllAdvanceSettings": {
      "settings": [
        {
          "keyword": "AS_DISPLAY_FRIENDLY_NAME",
          "value": "0",
          "name": "Display Friendly Name",
          "category": "Advanced Settings Details",
          "description": "Normally the friendly names will be displayed on this page and the internal freepbx_conf configuration names are shown in the tooltip. If you prefer to view the configuration variables, and the friendly name in the tooltip, set this to false.."
        },
        {
          "keyword": "AS_DISPLAY_READONLY_SETTINGS",
          "value": "0",
          "name": "Display Readonly Settings",
          "category": "Advanced Settings Details",
          "description": "This will display settings that are readonly. These settings are often internally used settings that are not of interest to most users. Since they are readonly they can only be viewed."
        },
        {
          "keyword": "AS_OVERRIDE_READONLY",
          "value": "0",
          "name": "Override Readonly Settings",
          "category": "Advanced Settings Details",
          "description": "Setting this to true will allow you to override un-hidden readonly setting to change them. Settings that are readonly may be extremely volatile and have a high chance of breaking your system if you change them. Take extreme caution when electing to make such changes."
        }
      ],
      "status": true,
      "message": "Setting's found successfully"
    }
  }
}

Versions Compared

Old Version 1

New Version Current

Key

Create Extension

Update Extension

Delete Extension

Create Range of Extensions

Fetch a particular extension detail

Fetch all Extensions Details

Fetch all valid extensions

Add Inbound Route

Update Inbound Route

Remove Inbound Route

Fetch All Inbound Routes

Fetch Inbound Route

Create Core Device

Update Core Device

Fetch a particular core device details

Fetch all Core Device Details

Delete Core Device

Update Advance Setting's

Fetch a particular advance settings details

Fetch all Advance Settings Details

Page Comparison

Versions Compared

Old Version 1

New Version Current

Key

Create Extension

Update Extension

Delete Extension

Create Range of Extensions

Fetch a particular extension detail

Fetch all Extensions Details

Fetch all valid extensions

Add Inbound Route

Update Inbound Route

Remove Inbound Route

Fetch All Inbound Routes

Fetch Inbound Route

Create Core Device

Update Core Device

Fetch a particular core device details

Fetch all Core Device Details

Delete Core Device

Update Advance Setting's

Fetch a particular advance settings details

Fetch all Advance Settings Details