| Table of Contents |
|---|
Smart BLF
The D & P series phones support 'Smart BLF' which allows control over LED color/blink for normal BLF behavior.
...
Display settings
Here you can set display related settings.
...
Volume Control Settings
This section will allow you to set volume control settings.
...
Redundancy Settings
Backup Destination- Enable and Disable the use of backup PBX servers IP Address or FQDN and port.
Backup Destination Address- If Backup destination Enable, you can define the backup PBX servers IP Address or FQDN (Secondary host).
Backup Destination Port- If Backup destination Enable, you can define the backup PBX servers IP Address or FQDN port.
Outbound Proxy- You can define the outbound PBX servers IP Address or FQDN.
Outbound Proxy Port- You can define the outbound PBX servers IP Address or FQDN port.
Sip Keep Alive Mode- You can enable and disable the sip keep alive mode.
Sip Keep Alive Interval (Seconds)- You can define the sip keep alive interval in seconds.
...
Ringtones
With our latest update for D Phones, now you can set D phones ringtones with custom ringtones.
...
The three options are available at the bottom of the Add New Ringtone page are:
Save- This button will save the custom ringtones in PBX database and convert the .wav or .mp3 ringtone file to sln16. The custom ringtones file will be save to path /tftpboot/ringtones/formatted.
Reset- This option will reset the Add new ringtone for unsaved custom ringtones file.
Delete- This option will delete the custom ringtones.
These two option are use to edit and delete the custom ringtones.
New Sangoma's D & P series Template
We have added the Ring Tone feature in Digium template. Here you can either choose default ringtones or custom uploaded ringtones.
Multicast Settings
With our latest update for D & P Phones , User can add and modify listener & Broadcast settings.
...
For now only 10 listener and Broadcast can be added and deleted using
...
Listener
Supported Devices - P320, P325, P330, P370, D40, D45, D50, D60, D62, D65, D70, D80
Name - A name to be provided in the phone's announcement status bar when audio is received over this listener.
IP-Address - Multicast address to which phone should subscribe for audio. IP-Address range (225.0.0.0 - 239.255.255.255)
Port - Port, combined with address above, to which phone should subscribe for audio. Valid integer for ports (1-65535).
Priority - Prioritization level, lower given more priority, for playing back streams when more than one subscribed address is providing audio.
Interrupt Calls - If 1, places any in-progress calls on hold before playing back audio, and ignore the phone's local volume setting, playing back the audio at full volume. If 0, in-progress calls will have their audio played over the top of any in-progress calls. If 2, phone will ignore pages for this listener if it is involved in another call
...
Broadcast
Supported Devices - P320, P325, P330, P370, D60, D62, D65.
...