Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Table of Contents
stylenone

Overview 

Release R111S019/R120S005 onwards , VEGA will have capability to tap DSP from VEGA GUI.

...

  1. As shown in below screen shot, User need to go to "DSP Capture" option as prevent with in "Reports" section
    i.e. GUI → Report→ DSP Capture as provided below:

    Image RemovedImage Added
  2. Now, user has to select the DSP channel on which call is present and DSP TAP has to be captured. Once the user selects the DSP channel on which TAP needs to be captured press start in order to start DSP TAP trace in that DSP channel.
    In below example user is trying to capture DSP TAP on dsp channel 1 where call is active:

    Image RemovedImage Added


    Once the DSP TAP is started on the user specified DSP channel, a pop-up windows showing the DSP status will appear on to the screen also, the DSP Capture Windows also provides intimation to user on which DSP port/channel Tap is running as shown below:

    Image RemovedImage Added

Stop DSP TAP Capture

...

  1. As shown in below screen shot, User need to go to "DSP Capture" option as prevent with in "Reports" section
    i.e. GUI → Report→ DSP Capture which mainly provides user information regarding on which DSP channel/port DSP Tap is running as provided below:

    Image RemovedImage Added
  2. In order to stop DSP Tap trace just click on Stop button as present on the window as shown below:

    Image RemovedImage Added

    Once the DSP trace is stopped properly a pop-up windows will appear on to screen stating the DSP Tap trace has been stopped properly as shown below:

    Image RemovedImage Added
Info

NOTE

User has to wait for around one minute in order to get DSP Stop process complete and once DSP Tap stop process is complete then only user should go ahead and disconnect the call.

...