| Info |
|---|
THIS WIKI HAS BEEN UPDATED FOR VERSION 13 OF YOUR PBX GUI |
This feature is for the PRO version of System Admin.
...
Device, Port, or Network Address for your UPS type. Example: /dev/ttyS0
On Battery Delay Time
The time, in seconds, from when a power failure is detected until the system reacts to it with an "on battery" event.
Battery Minimum Level
If during a power failure, the remaining battery percentage (as reported by the UPS) is below or equal to the Battery Minimum Level set here, the system will initiate a shutdown.
Minimum Runtime Remaining
If during a power failure, the remaining runtime in minutes (as calculated internally by the UPS) is below or equal to Minimum Runtime Remaining set here, the system will initiate a shutdown.
Timeout
If during a power failure, the UPS has run on batteries for longer than this setting, the system will initiate a shutdown. A value of 0 disables this timer.
Email Address
UPS event notifications will be sent to this e-mail address. Note that what you set here is automatically populated in the Notification Settings section of System Admin, and vice versa.
Save
When the information is set properly, click the Submit button.