IMG 1010 - IP Security
IP Security for IMG and GCEMS
...
Connections between IMG and GCEMS
Port # | Description | Purpose |
TCP: 20 & 21 | FTP |
|
TCP: 23 | Telnet | IMG debug access |
UDP: 111 | PortMap | Portmap is used to request a mount port. Usually for NFS or NIS. The port request is sent from the IMG to the GCEMS server. See PortMap Request below. |
UDP: 2049 | NFS |
|
UDP: 1812 | Radius Authentication | Call authentication |
UDP: 1813 | Radius Accounting | Record Call Detail Records |
TCP/UDP: 161 | SNMP Network | Receive SNMP requests |
TCP/UDP: 162 | SNMP Network | Receive SNMP Traps |
TCP: 12610 | GCEMS control | IMG Configuration and Provisioning |
UDP: 123 | NTP Network | Time Protocol |
Connections to the GCEMS server
Port # | Description | Purpose | Connection from |
TCP: 22 | SSH | Remote access to GCEMS server |
|
TCP: 5901 | VNC | Remote access to GCEMS server |
|
TCP: 80 | HTTP | MRTG or CACTI monitoring | Local support personnel |
TCP: 1312 | GCEMS | GCEMS application port |
|
TCP: 2623 | ClientView | Data Transfer Port between ClientView and DataManager | ClientView |
TCP: 2428 - 2433 | ClientView | FTP Transfer to DataManager | ClientView |
TCP: 2624 | ClientView | Signaling Port between ClientView and DataManager | ClientView |
TCP: 1098/1099 | ClientView | ClientView Authentication (Only required when ClientView is running on a different machine from GCEMS) | PC running ClientView to GCEMS server |
Connections between IMG's if running redundant SS7 or SS7 with remote IMG’s
Port # | Description | Purpose | Connection from |
UDP: 34867 | SS7 Management | Internal SS7 communication between IMGs | IMG |
PortMap Request
PortMap uses Port 111 and is used to request a mount port. Request is sent from IMG.
Mount uses the port returned in the PortMap response.
NFS uses port 2049
...