...
| Table of Contents | ||
|---|---|---|
|
Description:
SNMP (Simple Network Management Protocol) was designed as the standard language to be used by all computers on a network. The SNMP protocol is used by network management systems to communicate with network elements to monitor and control different aspects of the equipment. For SNMP to function in a network there needs to be at least two elements: The SNMP Manager and the SNMP Agent. See descriptions below:
...
Configuration management
Performance management
Accounting
Fault management
Security
SNMP Implementation on the IMG
...
Supports (4) SNMP Managers per GCEMS
Can manage network resources consumed by SNMP by limiting the number of traps. This will limit the amount of packets sent.
Supports industry standard MIBs. For a list of MIBs supported see link IMG 1010 - Supported MIBs.
For a list of supported Traps see link IMG 1010 - Supported Traps
Restrictions:
The IMG does not support the "SET" command in SNMP. Any "SET" commands can be accomplished through the GCEMS ClientView GUI.
The IMG does not support provisioning with SNMP
The IMG cannot act as a proxy
The IMG does not support Proprietary or Enterprise MIBs
...
The OID for the IMG 1010 is 1.3.6.1.4.1.2754.2.1 (Cantata)
The OID for the IMG 1004 is 1.3.6.1.4.1.2754.2.3 (Cantata)
The OID for the IMG 1010 is 1.3.6.1.4.1.3028.6.1.3 (Dialogic)
The OID for the IMG 1004 is 1.3.6.1.4.1.3028.6.1.5 (Dialogic)