...
| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Overview:
In order to play announcements and transmit/receive tones the IMG must have the Media and Media modules configured.
...
Right-click on the Media entry created above and select New Media Module.
Below is a screen capture of the Media Module Pane. There is only one Media Module that can get configured on the IMG1010 and it is considered an On-Board module. These settings should all be left as their defaults.
Configuring DSP Functions (IMG1010 only)
...
Right-click on the Media Module 0 object you just configured and select New Media DSP. Two Media DSP's can be created under the Media Module Object. Create Media DSP 0. This module will be used for transmitting and receiving tones
Below is a screen capture of the Media DSP 0 Pane.
Field Descriptions:
...
| Info |
|---|
For field descriptions see IMG 1010 - Media DSP. |
| Info |
|---|
NOTE ON CAS: |
Right-click on the Media Module 0 object you just configured and select New Media DSP. Two Media DSP's can be created under the Media Module Object. Create Media DSP 1. This module will be used for recording and playback.
Below is screen capture for Media DSP Pane 1
Configuring DSP Functions (IMG1004 only)
...
Right-click on the Media IMG object just configured and select New Media DSP. Only one Media DSP can be created under the Media IMG Object.
Below is a screen capture of the Media DSP Pane.
The functions of the DSP on the IMG1004 are not configurable like the IMG1010. The individual functions are hard-coded into the DSP chips and cannot be changed. The functions are shown in screen capture above and would change to a-law/MFR2 if the IMG1004 is configured as E1