Page Comparison

Overview

This page is intended to assist in the choice of the correct cable to connect a particular Eiconcard to the specific interface of the Data Communications Equipment (DCE) in use.

...

The image will launch in a separate browser window which you can simply close to return to this one.

S90, S91, S92, and S94 Eiconcards (VHSI interface) and also for 1550 / 1551 WAN Routers

Sockets on card: High-density 36-pin female D-type Very slim D-shaped connector with flat contacts

...

• VHSI V.24 DTE cable (connects to V.24 DTE/device) - 300-078

• VHSI Null-Modem cable (connects two VHSI cards) - 300-075

...

S50, S51, and S51 Eiconcards  (HSI interface) 

Socket on card: 26-pin female D-type  D-shaped connector smaller than the standard 24-pin V.24, but with 26 holes in 3 rows

...

• HSI V.24/V.35 Null-Modem cable (connects two HSI cards) - 300-031

• HSI X.21 Null-Modem cable  (connects two HSI cards) - 300-032 

• HSI V.35 Null-Modem cable for AS/400 (with female V.35) - 300-047 

• HSI Null-Modem conversion cable (connects two HSI cards) - 300-033 

...

C20, C21, C90, and C91 Eiconcards (V.24)     {See below for C91 PCIe LP}

Socket on card: Female 25 pin D-type

...