...
Table of Contents | ||
---|---|---|
|
Description:
This pane defines the configuration for a group of ISUP channels. The contents of the pane will vary depending on whether the associated SS7 Stack configured in the OPC-DPC field is an ANSI, ITU, or JTISUP stack.
...
For information regarding the ISUP Group with an ANSI stack selected in the OPC-DPC field, refer to IMG 1010 - ISUP Group - ANSI
For information regarding the ISUP Group with an JTISUP stack selected in the OPC-DPC field, refer to IMG 1010 - ISUP Group - JTISUP
Accessing this Pane:
Dialogic IMG EMS -> Routing Configuration -> Channel Groups-> Channel Group (SS7) -> ISUP Group
...
512 per SS7 Channel Group
Related Topics:
IMG 1010 - Configuring SS7 CIC Routing (section "Configuring an ISUP Group")
...
The selected option will be removed from the ISUP message. See IMG 1010 - Configuring SIP Privacy
Off (Default) |
Display Only |
Generic Number Only |
Display & Generic Number |
Calling Party Only |
Display and Calling Number |
Calling, Display and Generic |
...
Disable (Default) |
Enable |
See IMG 1010 - Local Number Portability (LNP)
Link OOS Handling:
Disable (Default) - Functionality is same as previous software. If Signaling Link goes Out Of Service, then the associated CIC's will go Out Of Service as well.
Enable - If signaling link goes Out Of Service all associated CIC's which are in the idle state will go Out Of Service. If any CIC's are in either the ringing or connected state the CIC's will not go Out Of Service until a later subsequent condition occurs. See IMG 1010 - SS7 Link OOS Handling for more information on configuration and functionality.
...
Reject Calls (Default) - If IMG receives a call with the CUG parameters (Interlock Codes) then IMG will reject the call with a cause code of 29 facility rejected. See Call Trace - CUG rejected which is call trace of rejected call with CUG parameter.
Ignore - If IMG receives a call with the CUG parameters (Interlock Codes) then the IMG will pass the call. See Call Trace - CUG passed which is a call trace of a passed call with CUG parameter.
...
The field Transparent ISUP via SIP-T is utilized when messaging is being received via SIP-T on incoming channel group and is being sent out of IMG via an SS7 ISUP Channel group. Before configuring verify that SIP-T is enabled and configured. See SIP Signaling - SIP and SIP Signaling - SIP-T Entity for more information on configuring/enabling SIP-T:
...