...
| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Description:
Within this pane SS7 stack information is configured.
...
| Info |
|---|
Note on SS7 Functionality on the IMG 1004: With each new software release Dialogic has added new SS7 functionality to the IMG 1004. See timeline below:
|
Related Topics:
IMG 1010 - Configuring SS7 Signaling - 10.5.1
IMG 1010 - An Overview of SS7 Configuration
Technical Notes:
When configuring an SS7 Stack, the following happens:
...
Signaling Gateway (SG) Mode - The stack being created will have M3UA Service set to Signaling Gateway mode. Signaling Gateway mode can be configured on up to (4) stacks total per Logical IMG Group. See IMG 1010 - Overview of Sigtran M3UA. When the Signaling Gateway Mode is selected, either SCCP, TCAP, or both will need to be configured from the SCCP and TCAP fields explained above.
Application Server (AS) Mode - The stack being created will have M3UA Service set to Application Server mode. Application Server mode can be configured on up to (4) stacks total per Logical IMG Group. See IMG 1010 - Overview of Sigtran M3UA. When the Application Server Mode is selected, either SCCP, TCAP, or both will need to be configured from the SCCP and TCAP fields explained above.
...
Point code format is 7-4-5
Manual COT test not supported
Unique CIC mapping scheme (see IMG 1010 - JT ISUP CIC Mapping)
Troubleshooting
Check for Point Code Mismatch* Make sure Distant End Gateway supports JT-ISUP
...