Versions Compared

Old Version 1

changes.mady.by.user Nathaniel Halbrooks

Saved on

compared with

New Version Current

changes.mady.by.user Kelli Higdon

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Identifying the SSD in question

    1. Top SSD is labled as /dev/sda

    2. Bottom SSD is labled as /dev/sdb

  2. GUI Raid Status

    1. GUI -> Reports -> System -> Storage Status

...

    1. 1 (1).jpgImage Added

  2. Turn off the Sangoma appliance

    1. Take out the faulty SSD

    2. Replace the faulty SSD with a new blank SSD

  3. Turn on the Sangoma appliance

  4. Navigate to GUI Raid Status

    1. GUI -> Reports -> System -> Storage Status

    2. Click on Recover Raid

      1. You will see the message "Recovery in Progress"

      2. The Raid1 will sync all information from working disk to the new blank one

...