...
|
...
|
...
|
...
|
...
|
...
Name | Required | Type | Default | Description |
---|---|---|---|---|
oldExtension | Optional | string | Old Extension. Used to change the current extension | |
oldCidnum | Optional | string | Old CID Num. Used to change the current cid number | |
extension | Mandatory | string | Define the expected DID Number if your trunk passes DID on incoming calls. | |
cidnum | Mandatory | string | Define the CallerID Number to be matched on incoming calls. Can only be numbers, A-D, * and #. DID may also start with a +. Patterns must begin with an _ DID may also start with a +. | |
description | Optional | String | Provide a meaningful description of what this incoming route is | |
privacyman | Optional | Boolean | If no CallerID has been received, Privacy Manager will ask the caller to enter their phone number. If an user/extension has Call Screening enabled, the incoming caller will be prompted to say their name when the call reaches the user/extension. | |
alertinfo | Optional | String | ALERT_INFO can be used for distinctive ring with SIP devices. | |
ringing | Optional | Boolean | Some devices or providers require RINGING to be sent before ANSWER. You'll notice this happening if you can send calls directly to a phone, but if you send it to an IVR, it won't connect the call. | |
mohclass | Optional | String | Set the MoH class that will be used for calls that come in on this route. For example, choose a type appropriate for routes coming in from a country which may have announcements in their language. | |
grppre | Optional | String | CID name prefix | |
delay_answer | Optional | Integer | An optional delay to wait before processing this route. Setting this value will delay the channel from answering the call. This may be handy if external fax equipment or security systems are installed in parallel and you would like them to be able to seize the line. | |
pricid | Optional | Boolean | This effects CID ONLY routes where no DID is specified. If checked, calls with this CID will be routed to this route, even if there is a route to the DID that was called. | |
pmmaxretries | Optional | String | Number of attempts the caller has to enter a valid CallerID. Default value is 3 | |
pmminlength | Optional | String | Minimum amount of digits CallerID needs to contain in order to be considered valid. Default value is 10 | |
reversal | Optional | Boolean | On PRI channels the carrier will send a signal if the caller indicates a billing reversal. | |
rvolume | Optional | String | Override the ringer volume. Note: This is only valid for Sangoma phones at this time. Default value is 0 | |
fanswer | Optional | Boolean | Set to Yes to force the call to be answered at this time | |
destination | Mandatory | String | Destination for route |
...