...
...
...
...
...
  |   |  |   |  |
| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Unboxing
When opening up your Vega Gateway packaging, carefully inspect the components for any signs of damage due to shipping.
If you notice any damaged components please contact your point of purchase and indicate the issue.
Do not continue to install your Vega Gateway if any of your components are damaged.
...
Power - DC Power connector.
E1/T1 Port 1-2 - RJ45 port used to connect your E1/T1 Cable
LAN Port 1/LAN Port 2 - RJ45 ports used to connect your LAN cables. These are Gigabit compatible ports.
Console - Used for diagnostics. Console cable plugs into this port
| Info |
|---|
Port 1 is configured for CPE/TE. This port is typically connected to Telco as it is set to receive the clock from the remote side |
...
Power - DC Power connector.
Analog/BRI Ports - porst used to connect analog/bri cables
LAN 1/LAN 2 - RJ45 ports used to connect your LAN cables.
Console - Used for diagnostics. Console cable plugs into this port
...
Vega 5000
Front Panel of Vega 5000
...
FXO Plug-In Module (for Vega 3050G)
...
Vega 60G
Front Panel of Vega 60G
...
Front Panel of Vega 4 x 4
...
Back Panel of Vega 4 x 4
Ground
Power - AC Power socket.
PSTN Interfaces: Protocol and density varies based on model Module(s) Inserted
Console - Used for diagnostics. Console cable plugs into this port
LAN Ports- RJ45 port for LAN
Power LED
...
Pin | FXSFXS | FXOFXO | FWIC | GenGen |
1 |
| |||
2 |
|
|
|
|
3 |
|
| Rx |
|
4 | Tip | Tip | Tx | Tx/Rx |
5 | Ring | Ring | Tx | Tx/Rx |
6 |
|
| Rx |
|
7 |
|
|
|
|
8 |
|
|
|
|
Hardware Installation
Placement
The Vega Gateway can be placed either table top or rack mounted
Table Top: Place Vega Gateway on flat level surface, away from moisture. Verify adequate ventilation to prevent unit from overheating.
Rack Mounting:
All Vega Gateways can be rack mounted. The packaging contents should include rack mounting brackets to be used when mounting on a standard 19" rack unit.
Prerequisites:
Rack mounting bolts (not supplied) are required to mount the gateway + bracket assembly to the rack unit
Rack Mounting Guides:
Ground
Once a location has been selected, properly ground the Vega Gateway using the ground lug located to the left of the power socket
...
FXO- Plug-In Module For Vega 3050G
Proceed to the "Finding your IP address" page now to being accessing the Vega Gateway WebGUI.
...