...
| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The topic below displays how to configure the IMG 2020 to match on a specific incoming digit string and translate it. Once translated, send the translated string out an outgoing channel group. The procedure assumes that the configuration described in the Basic Configurations topic have been completed and therefore will start with creating and configuring channel groups. The procedure describes how to match and translate a number received from the SIP side, translate it and transmit it out to another SIP network.
...
A Translation Table and its entries will not automatically be sent to the IMG 2020. Simply committing an object does not download the translation table. After configuring the translation table, translation table entries, and then committing the object, click on the Download Translation Table button and the updated translation table will be sent to the IMG 2020.
Configuration Example
...
Right click on Routing Configuration again and select New Incoming Translation Tables. The Incoming Translation Tables object is the parent object to numerous translation tables and translation table entries. No configuration is needed in the Incoming Translation Tables object. Refer to the Incoming Translation Tables topic for more information.
Right click on the Incoming Translation Tables object and select New Translation Table. Either accept the default or enter a name to identify the translation table being created. Refer to the Translation Table topic for more information on this object.
Right click on the Translation Table object and select New Translation Element. Leave the String To Match as Dialed number since this procedure will be translating the dialed number.
Enter a string to match in the String field. Enter a translation in the Dialed # Translation field. See screen capture below.
Description |
Type of Operation field should remain as Translation. |
The string field is a Dialed Number. |
The incoming string will not be translated unless there is a 1508862 in the Dialed Number parameter. See Digit Matching. |
The number will be translated so that 1508862 is being dropped and only the last four digits of the Dialed Number are sent. See Digit Translations . |
...
Right click on Routing Configuration again and select New Outgoing Translation Tables. The Outgoing Translation Tables object is the parent object to multiple translation tables and translation table entries. No configuration is needed in the Outgoing Translation Tables object. Refer to the Outgoing Translation Tables topic for more information on this object
Right click on the Outgoing Translation Tables object and select New Translation Table. Either accept the default or enter a name to identify the translation table being created. Refer to the Translation Table object for more information on this topic.
Right click on the Translation Table object and select New Translation Element. Leave the String To Match as Dialed number since this procedure will be translating the dialed number.
Enter a string to match in the String to Match field. Enter a translation in the Dialed # Translation field. See screen capture below.
Description |
Type of Operation field should remain as Translation. |
The incoming string is a Dialed Number. In the capture it is represented by x's |
The incoming string will match on any dialed number. Refer to Digit Matching. |
The number 1 will be appended to the dialed number. Refer to Digit Translations. |
...