...
The Phone Import Wizard allows for easy uploading the information of a bulk of phones to the Portal under your Organization´s account. The Zero Touch Provisioning redirection service can also be easily configured for all of those phones through here, we'll detail the process for this provisioning in this article.
Pre-requisites
For Zero Touch Provisioning, you need to make sure the following parameters are configured on your FreePBX/PBXact server:
...
| Info |
|---|
If going through the IP-PBX's firewall, make sure that the provisioning ports, shown inside the green square above, are accessible by the phones (can be modified under: Modules > Connectivity > Firewall > Services > Extra Services). Access to those ports must also be open in any other firewall that may be in the path between the IP-PBX and the phones. |
Enabling the Zero Touch Provisioning redirection service for the phones with the Phone Import Wizard
1. Go to the "Phone Import Wizard" page inside the Sangoma Portal (under: My Products > Sangoma Phones > Phone Import Wizard):
...
7. The phone should automatically reboot once more after which it will remain properly registered to the extension used on step 6.
Appendix
If, for some reason the phone does not show the Login button(s) after the first reboot, or fails to register after the second, automatic, reboot, it may be that some previous configurations (mainly the currently stored provisioning server parameters) are interfering with it. Just Factory Reset it (in its webUI under: Management > Upgrade > Reset to Factory):
...