You can set the configuration server directly from the phone or by accessing the phone GUI through a local web browser.
Directly from the Phone
Press the Menu button.
...
Use the arrow buttons to highlight the Setting option, then press the Enter button.
...
Info |
---|
If you are using HTTP for the mode you will need to set the Port Number that your PBX is setup to listen on for HTTP provisioning as shown in the Global Settings section of End Point Manager. Example would be http://10.10.48.2:84 with 84 being the Port Number Important: If you have enabled HTTP/HTTPS/FTP provisioning with authentication at System Admin (PRO), please refer to this wiki for the proper format of the URL string. |
From the Phone GUI
Enter the IP Address of the device into a local web browser.
When prompted, enter admin as the user name. The password, by default, is also admin. Click the OK button to continue.
...