...
...
...
...
...
...
...
...
| Table of Contents | ||
|---|---|---|
|
Algo 8028 & 8180
...
How to Find the IP Address
...
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Toward the bottom of the page put in the password of your device, which is "algo" by default.
Once logged in, pick the “Status” option at the top of the page.
Scroll to the bottom of the page and you should see the MAC Address.
How to Set the Configuration Server
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Toward the bottom of the page put in the password of your device, which is "algo" by default.
Once logged in, pick the “Config” option at the top of the page.
Scroll to the bottom of the page and set the following options.
Provisioning- Enabled
Prov. Static Server- This should be the IP Address of your PBX followed by a “:” In our example this is 10.10.0.1:
Prov. Download Method- Select either TFTP, FTP or HTTP depending on what you have setup on your PBX. The default protocol most people use is TFTP.
...
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Toward the bottom of the page put in the password of your device, which is "algo" by default.
Once logged in, pick the “Services” option at the top of the page.
Scroll to the "Settings" section and press the “Reset” button to factory reset the device.
