| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Overview
The main purpose of this article is to show how to send fax calls between a Digital and Analog Vega bypassing the Switchvox. The wiki will also show how to also send normal voice calls from both the Digital and Analog Gateways to and from the Switchvox.
Introduction
For Trunking solutions, Vega Gateway to Switchvox Configuration Guide provides detailed information about the configuration requirements in Vega series of Gateways Vega 60G, Vega 100G, Vega 200G, Vega 400G. A typical deployment connects PSTN Network to Vega Gateway on one side using Vega T1/E1/BRI or FXO interface and Switchvox IP-PBX on the other side. Using SIP Protocol the Vega and the Switchvox create a Trunk together.
For Analog Station solutions, the Vega Gateway to Switchvox Configuration Guide provides detailed information about the configuration requirements for the Vega 60G, Vega 3000G and Vega 3050G series gateways. A typical deployment connects analog phones to the FXS interfaces of the Vega Gateway, bridging the connections to the Switchvox IP-PBX, registering each analog line as an FXS Extension on the Switchvox. However, in this case for the fax FXS lines plugged into the Analog Vega will not be registered to the Switchvox - they will be bridged directly to the Digital Vega.
Digital Trunking
Connecting PSTN Trunks into the Vega to deliver the calls to the Switchvox.
Switchvox Configuration
Please see Switchvox Trunking Configuration
Analog Extensions
Connecting Analog Phones into the Vega Gateway and Registering the corresponding Extensions to the Switchvox. Each FXS Line will individually Register to the Switchvox. This will allow the Switchvox to call each Extension on the Vega.
Switchvox Configuration
Please see Switchvox FXS Station Configuration
Vega to Vega Configuration
First step is to configure a 2nd SIP Profile on both the Digital and Analog Vega's.
...