| Info |
|---|
This feature is only available in the PRO version of System Admin. |
| Table of Contents |
|---|
Overview
On this page you can set your FTP, TFTP and HTTP Provisioning Server information.
...
On the top menu click Admin
In the drop down click System Admin
In the right side navigation menu click FTP Server
Enable/Disable FTP
Enable
...
Choose FTP Server: Enabled
Enter a Username that FTP clients will use for authentication
Enter a Password that FTP clients will use for authentication
Click Update
...
| Code Block |
|---|
0e351a4e:d07ef38ad0e35982@server.example.com |
Disable
...
Choose FTP Server: Disabled
Click Update
Enable/Disable TFTP
Enable
...
Choose Enable TFTP Server
Click Update
Disable
...
Choose TFTP Server: Disabled
Click Update
HTTP(s) Authentication
HTTP and HTTPS Authentication requires that endpoints must authenticate themselves to the server before receiving their configuration. This is normally done by configuring your DHCP Option 66 parameter to include a complete URL. Using the example below, assuming that the machine was listening on port 4443 for HTTPS Provisioning requests, the URL would be:
...