...
Below is a sample screenshot of a Vega 60G FXS Gateway configuration page.
Basic Configuration
As shown in the above screenshot, the following parameters are configurable:
Vega Rx Sip Port - Vega Gateway local SIP signaling port.
Vega SSH Port - SSH port of Vega gateway.
Hostname - Hostname of Vega gateway. This can be any unique hostname in alphanumeric format.
Country - Vega gateway country profile. This is based on this country the Vega Gateway will reside and will apply selected country profile configurations like tones etc.
Emergency numbers - Emergency number configuration.
LAN Configuration
As shown in below LAN Configuration screenshot, The Vega gateway LAN settings are configured, such as Static IP or DHCP.
If selecting "Static" for "IP Assignment", then all the LAN related settings like gateway, DNS , NTP server will need to be entered
...
SIP Driver Configuration
We can use either PJSIP or ChanSIP as driver to connect to Vega gateways from FreePBX.
...
Vega Configuration → SIP Driver
...
Using PJSIP driver to connect with Vega
Please make sure to follow PJSIP Endpoint configuration wiki when working with PJSIP driver to connect with VEGA.
Please find below right working order for the PJSIP Endpoint identifier.
...
Advanced Configuration
As shown in the below sample screenshot, the options are:
...
| Info |
|---|
The Vega Gateway configuration can be restored by uploading the PBX Vega Gateway Module generated configuration file. You cannot upload the configuration file downloaded from Vega Gateway to the PBX Vega Gateway Module. |
FXS Configuration
As shown in thebelow screenshot , the following parameters are required:
...
| Info |
|---|
Caller ID, MWI , Digital Rx and Tx gain will automatically be set to Vega gateways default values as per the selected "Country" in Basic configuration. |
FXO Configuration
| Info |
|---|
Each port of FXO gateway will be associated with configured SIP Trunk. |
...
Handle Emergency calls - Select if this port will be use to handle emergency calls as well.
Enable Caller-id Detection - Detection of caller id is enable on this port.
Numeric Caller id - Numeric caller id of this port.
Textual caller id - Textual caller id.
Telephone number(s) to route to this FXO interface - Specify number(s) or '.*' (all) to send to specific FXO ports.
'DID to forward to FreePBX - This is "inbound routes" DID in freepbx.
...
Digital/PRI Configuration
| Info |
|---|
Each port of Digital/PRI gateway will be associated with configured SIP Trunk |
...