| Table of Contents |
|---|
Overview
After you register your system and purchase a commercial module from the Portal Store, you just need to do two basic things in order to get the new module up and running:
...
Log into your PBX GUI.
Go to Admin → System Admin.
Depending on your version of the PBX GUI, click on either the License or Activation option on the right side of your screen.
You should now see all modules that the deployment is licensed for. Verify that the license on your box shows all the commercial modules that you have purchased.
If you do not see your new item listed, simply press the Check, or Update License, or Update Activation button depending on what version of Sysadmin you have installed. The PBX should reach out to our license server and update your licenses.
...
Log into your PBX GUI.
Go to Admin → Module Admin.
The table shows a list of modules along with their version, track, publisher, license, and status. Look for your module in the list.
If you find the module in the list and its status is "Enabled," the module is installed and ready for you to use (as long as it is licensed).
If you find the module in the list but its status is "Disabled," you need to enable the module. See the full Module Admin User Guide for info.
If you cannot find the module in the list, proceed with the installation instructions below.
...
Log into your PBX GUI.
Go to Admin → Module Admin.
Select the Commercial repository (button will be dark blue when selected).
Click the Check Online button.
The list will update to include commercial modules that are available but not installed.
In our example, the QXact Reports module is not installed.
Click the arrow or the name of the module in order to expand the information for it.
Click the Install or Download and Install button, as appropriate, to select it. (The button is dark blue when selected.) This button does not actually perform the action, but it selects the action that will be performed.
In our example, we are downloading and installing QXact Reports.
Click the Process button near the top of the screen.
The next page will summarize your selected actions. Click the Confirm button to confirm the actions.
Click the Return button that appears after the process is complete.
Click the Apply Config button.
Your module should now show as installed and enabled.
You can navigate to the module in the PBX GUI menu.
More Information on System Admin & Module Admin
...
More detailed user guides for the System Admin and Module Admin modules are available. These guides cover other features that are not explained here, including how to update modules. Click on one of the links below to go to the wiki for that module.