→ COMMERCIAL MODULES NOT SUPPORTED See How to Purchase FreePBX Commercial Modules
→ COMMERCIAL MODULES NOT SUPPORTED See How to Purchase FreePBX Commercial Modules
Registering your PBX system to the Sangoma Portal allows you to purchase commercial module add-ons to your PBX system. We refer to each PBX as a "Deployment" in the portal. Deployments are PBX instances that allow software and support to be connected with a PBX. Before you are able to purchase commercial modules or software, you must have at least one deployment registered and licensed. For more information, please see Registering your System for Commercial Modules.
Non-FreePBX Distro systems, such as PIAF, do not support FreePBX commercial modules at the time of installation. You will need to install a few packages and a FreePBX module to register your system. Please follow the guide below to enable support for FreePBX commercial modules.
Commercial modules are only officially supported on the FreePBX Distro. Any FreePBX system with FreePBX 2.10 or greater, CentOS/RH/SL/EL 6.x and php 5.3 should work with most commercial modules, but there are no guarantees that all features and functions will work. You are on your own if there are issues, but you can purchase support and contact the FreePBX paid support department for assistance.
...
Log into your FreePBX system and attempt to locate the System Admin Module in the GUI. If the System Admin module is installed on your FreePBX system, stop here and skip to the section "Register your FreePBX system to our License Server" in the FreePBX Distro wiki.
Otherwise, if System Admin is not installed, follow the steps below to enable the System Admin module:
...
| Info |
|---|
You can now follow the normal guide for registering your PBX as outlined in the "Register your FreePBX system to our License Server" in the FreePBX Distro wiki.. |