10.5.3_SP12 - An Overview of Features
F-5407-RADIUS Span/Channel ID VSA's
Brief Description:
Feature F-5407 adds two new RADIUS Vendor Specific Attributes (VSA's). The two new attributes are the Dialogic-span-id (154) and the Dialogic-channel-id (155). The two new VSA's logged take the span id and channel id of an incoming or outgoing call and add them to the RADIUS Accounting Start and Stop messages. The two new VSA's are both displayed as a string and mimic the span and channel being utilized in the call. Refer to the links in the Related Topics section below.
Related Topics:
IMG 1010 - RADIUS - Dialogic VSA's
F-6388 DSP Auto Recovery
Brief Description:
DSP functionality on the IMG 1010 and IMG 1004 determine the number of VoIP channels that can be utilized. If a single DSP fails, the number of VoIP channels available is decreased. This adds a new set of issues like having enough resources available for the traffic being sent through the system. To alleviate the issues, the DSP's will initiate an automatic reboot of itself to bring it back to its running state. After three reboots attempts with no success, the DSP is rendered DEAD and cannot be brought back to its running state unless a total system reboot is initiated. Feature F-6388 DSP Auto Recovery feature will wait a set interval after the third reboot and then restart the reboot process. The reboot process continues till the DSP either goes back to its running state or in the case of a hardware failure, the module is replaced. Refer to the links in the Related Topics section below for more information.