IMG 1010 - Advanced Originating Number Parameters

Description:

The Originating Number or Original Called Number parameter is located in the ISUP messaging and displays information on the original called number after a call has been redirected. The IMG can be configured so the outgoing information such as Nature of Address, Numbering Plan, Calling Party Category, Number Incomplete Indicator, Screening Indicator, and Presentation Indicator can be translated. The settings selected in each of the fields will be included in the Originating Number Parameter if the Originating # Translation field in the Translation Table Entry being configured is populated with an outgoing number. With Originating Number Parameter, the IMG will match and translate the values of various parameters set in this object.

Accessing this Pane:

Dialogic IMG EMS > New Routing Configuration > New Incoming Translation Tables > New Incoming Translation Table > New Translation Entry > New Advanced Originating Number Translation.

Maximum Objects:

1 per Translation Entry

Previous Pane:

IMG 1010 - Translation Entry

ClientView Pane:

Field Descriptions:

Nature of Address:

Specifies the way in which a number is characterized to an SS7 network for call setup. The selections below indicate what to translate the Nature of Address Parameter to.

ID:	Translation:
000	Reserved
001	Subscriber Number
002	Unknown - National Use
003	National Number
004	International Number
005	Network Specific Number
006-112	Unknown NOA
113	Subscriber Number - Operator Requested
114	National Number - Operator Requested
115	International Number - Operator Requested
116	No Number Present - Operator Requested
117	No Number Present - Cut Through
118	905 Call
119	Test Call
120-127	Unknown NOA
N/A	No Translation

Numbering Plan:

Specifies the numbering plan to which a number conforms. The selections below indicate what to translate the Numbering Plan Indicator Parameter to.

ID:	Translation:
000	Unknown
001	ISDN/Telephony
002	Unknown
003	Data Numbering Plan
004	Telex Numbering Plan
005-007	Unknown
N/A	No Translation
008	National Standard Numbering Plan
009	Private Numbering Plan

Calling Party Category:

Identifies the category with which a call is associated. The selections below indicate what to translate the Calling Party Category Parameter to.

ID:	Translation:
000	Unknown
001	Operator - French Language
002	Operator - English Language
003	Operator - German Language
004	Operator - Russian Language
005	Operator - Spanish Language
006-008	Operator - Unspecified Language
009	National Operator
010	Ordinary Calling Subscriber
011	Calling Subscriber with Priority
012	Data Call - Voice band data
013	Test Call
014	Unknown
015	Payphone
016-255	Unknown
N/A	No Translation

Number Incomplete Indicator:

Specifies whether the digits dialed by the calling party constitute a complete number. The selections below indicate what to translate the Number Incomplete Indicator Parameter to.

ID:	Translation:
000	Number is complete
001	Number is Incomplete
N/A	No Translation

Screening Indicator:

Specifies whether the location information was provided by the user or by the network, as well as the quality of the information. The selections below indicate what to translate the Screening Indicator Parameter to.

ID:	Translation:
000	User Provided Location - Not Screened
001	User Provided Location - Verified and Passed
002	User Provided Location - Verified and Failed
003	Network Provided Location
N/A	No Translation

Presentation Indicator:

Specifies whether the 2020 IMG can display the calling party number on the called party Caller ID screen. The selections below indicate what to translate the Presentation Indicator Parameter to.

ID:	Translation:
000	Presentation Allowed - The IMG can display the calling party number.
001	Presentation Restricted - The IMG cannot display the calling party number.
002	Address Not Available - The calling party number is not available to display.
003	Spare
N/A	No Translation

SI/PI Priority

When Privacy is enabled the value of the incoming screening and presentation indicator parameters from the Remote Party ID can either be passed through from SIP to SS7 unchanged or the parameters can be translated to the values selected in the Screening and/or Presentation Indicator. Before this field functionality was added, when Privacy was enabled, the value of the screening indicator and presentation indicators would be passed from SIP to SS7 unchanged no matter what the fields in the Screening Indicator and Presentation Indicator were configured for. The feature is configured so that with Privacy Enabled, the parameters can be modified before being sent to the SS7 side. For more information including call flows, tables, and configuration refer to the IMG 1010 - Translate SI and PI - SIP to SS7 topic.

Disable (Default)- The new functionality is disabled. When Privacy Support is enabled, the value of the screening indicator and/or presentation indicator in the RP-ID header will be passed from the SIP network to the SS7 Network unchanged. The settings in the screening and presentation indicator fields above have no affect.

Enable- The new functionality is enabled. When Privacy Support is enabled, the value of both the presentation indicator and screening indicator in the RP-ID Header on the incoming SIP side will be overridden by the setting in the presentation and screening indicator fields above and then sent to the SS7 side modified.